<h3>
Answer: Point E is located at (2, 3)</h3>
====================================
Explanation:
The sequence PQRST has T as the last letter.
The sequence ABCDE has E as the last letter
The two letters T and E pair up or they correspond. So T will rotate to land on point E. Or T will rotate to point E's location.
Point T is at location (-3,2). So x = -3 and y = 2.
-------
Use the rule
(x,y) ---> (y, -x)
which is the rule we use when we rotate any point 90 degrees clockwise around the origin. We swap the x and y coordinates, then change the sign of the second coordinate (after the swap happens).
This means,
(-3, 2) ----> (2, -(-3)) = (2, 3)
or simply
(-3, 2) ---> (2, 3)
Answer:
The length of the first piece is 4 inches, that of the second is 8 inches and the third 19 inches.
Step-by-step explanation:
Total length of the steel = 31 inches
Let the length of the first piece = x
let the length of the second piece = y
Let the length of the third piece = z
So,
y = 2x
z = 4x + 3
x + 2x + 4x +3 = total length of the steel = 31
7x + 3 + 31
7x = 31 - 3
7x = 28
x= 4 inches
Thus; y = 2x = 2 × 4 = 8 inches
z = 4x +3 = 4×4 +3 =19 inches
∴The length of the first piece is 4 inches, that of the second is 8 inches and the third 19 inches.
Answer:
Approximately 4.67 feet of fabric is required for one pillow case.
Step-by-step explanation:
We are given the following in the question:
Number of pillow cases to be made by Jenny = 3
Amount of fabric Jenny has = 14 feet
Each pillow case use same amount of fabric.
Amount of fabric used to make 1 pillow case =
Thus, approximately 4.67 feet of fabric is required for one pillow case.
