A gallon equals 0.134 cubic feet. First, we determine the amount of water ( $Q$ ), measured in cubic feet, needed to put out the fire under the assumption that water is consumed at constant rate:

$Q = \dot Q \cdot \Delta t$ (1)

Where:

$\dot Q$ - Volume rate, measured in feet per minute.

$\Delta t$ - Time, measured in minutes.

If we know that $\dot Q = 2000\,\frac{gal}{min}$ and $\Delta t = 120\,min$ , then the amount of water is:

$Q = \left(2000\,\frac{gal}{min} \right)\cdot (120\,min) \cdot \left(0.134\,\frac{ft^{3}}{gal} \right)$

$Q = 32160\,ft^{3}$

And the diameter of the cylindrical tank based on the capacity found above is determined by volume formula for a cylinder:

$Q = \frac{\pi}{4}\cdot D^{2}\cdot h$ (2)

Where:

$D$ - Diameter, measured in feet.

$h$ - Height, measured in feet.

If we know that $Q = 32160\,ft^{3}$ and $h = 12\,ft$ , then the minimum diameter is:

$D^{2} = \frac{4\cdot Q}{\pi\cdot h}$

$D = 2\cdot \sqrt{\frac{Q}{\pi\cdot h} }$

$D = 2\cdot \sqrt{\frac{32160\,ft^{3}}{\pi\cdot (12\,ft)} }$

$D \approx 58.415\,ft$

The minimum diameter of the cylindrical tank needed to store the quantity needed to put out the fire is approximately 58.415 feet.

8 0

3 years ago

The graph of f(x) is shown. Estimate f(-3).<br> f(-3) = 1

Effectus [21]

Answer:

There is no graph.

But 1 would be a good estimate if f(-3)=1

Step-by-step explanation:

5 0

3 years ago

What should you do first to simplify the expression (43 + 9) ÷ 76 + 5?

Vaselesa [24]

Do the parentheses first

5 0

3 years ago

What is the discriminant of the polynomial below 9x^2-18x+9?

harkovskaia [24]

(3x-3 )(3x-3 ) is answee

6 0

4 years ago