Answer:
Explanation:
An FPGA is a field programmable gate array. It could be "programmed" to do certain task, but don't mistake it with a microprocessor. When programming an FPGA, you're actually changing it's physical structure, the logic gates inside the FPGA, to do the task for you. Therefore, unlike a microprocessor which has to run through a series of command, an FPGA could be rewired to run at a much faster and more efficient rate.
FPGA is good for testbenching and are budget friendly since they can be reprogrammed over and over again in case you messed up. However, they can be quite big and bulky, so they are not suitable for mass production.
ASIC in the other hand can be compact to a small size. ASIC are pretty much the IC chips that you use, like your Intel CPU or LM7000 series chips. However, the process of making them that small is irreversible, so if you messed up, you gotta throw away the whole batch. This make them expensive to make, but their small size and production process allows them to be made in bulk.
Both FPGA and ASIC are good for power consumption and speed because you're actually designing their physical circuit layout, so if your design is efficient then the product will be efficient in both speed and power as well.
In Summary, you design and test your circuit using an FPGA first. Then you send that design to a production company and they will use that design to mass produce it as a small chip.
Answer:
64 terabytes
Explanation:
Given data:
Size of the disk block = 8 KB
Size required by the pointer to a disk block = 4 bytes
Now,
Size required by 12 direct disk blocks = 12 × 8
Size required by single disk block = 2048 × 8 KB
Size required by double disk block = 2048 × 2048 × 8 KB
size required by triple disk block = 2048 × 2048 × 2048 × 8 KB
Now,
the maximum size of the file that can be stored in the this file system = 12 × 8 + 2048 × 8 KB + 2048 × 2048 × 8 KB + 2048 × 2048 × 2048 × 8 KB = 64 terabytes
Answer:
1. Microsoft Excel helps data analysis through different spreadsheet queries and operations options.
2. Input data to the analysis of sales by product is required for the development of formula and extracting results.
3. The information of data source and frequency of report is required to start the work.
Explanation:
1. Microsoft Excel tool can be used to calculate the results of equipment. Obtained results can be displayed in charts and graphs from the excel.
2. Information like the quantity of sold items, remaining items are required to produce accurate, useful analysis.
Before starting assignment accounting manager will be asked the following questions.
1) Where does the input data come from?
2) Is analysis required on a daily basis or once for all provided data?
3) Is Summary is in the form of tabular data, Graphical data, or Both?
Answer:
Word Status Bar or Status Bar
Explanation:
Answer:
C. Aggregation switch.
Explanation:
Aggregation switch is a type of switch used to combine multiple network connections into a single link.
In Computer Networking, Aggregation switches are primarily designed to be used for connecting the Top-of-Rack (ToR) switches to a core switch or router, as the case may be.
Generally, the core switch is typically placed at the top of the data center network architecture topology.
An aggregation switch is usually designed to be large in size and has a lot of interfaces or ports for the connection of multiple networks into a single logical link.
<em>Additionally, the connections are mainly done in parallel in order to prevent total downtime or redundancy in a network, as well as to enhance the throughput than what is obtainable in a single network. </em>
