Answer:
C) 99
Explanation:
This code only displays "That number is acceptable" when such number is higher than 10 and less than 100. This is becasue the conditional sentence <em>if </em>controls which message is going to be displayed based on the abovementioned condition. 0 and 10 are not greater than 10, so they don't pass the condition and 100 is not less than itself, so it does not pass either. The only number among the options greater than 10 and less than 100 is 99.
Answer:
A spreadsheet program included in Microsoft Office suit of application. Spreadsheets present tables of value arranged in rows and columns that can be manipulated mathematically using both basic and advanced functions.
Answer:
Revisiting "Build a Tower"
Recall in the last section how we made Karel make a tower of tennis balls. We told Karel to move() and turnLeft() and putBall() until we had a tower. At the end of the program, Karel was still at the top of the tower, like as in the picture below.
Stuck at top
Suppose that now we want Karel to come back down from the top of the tower. The first thing we need to do is get Karel facing in the right direction. One way to do this is to tell Karel
turnLeft();
turnLeft();
turnLeft();
And then tell Karel to
move();
move();
move();
back to the bottom of the tower.
However, telling Karel to turnLeft() three times is not very readable. That's a lot of writing when all we really want is to tell Karel to "turn right."
Explanation:
Hopefully it would help.
Answer:
Physical and data link layer.
Explanation:
The ethernet cable is used at the physical layer. The physical layer consists of hardware components. This layer is responsible for transmission of data bits between two nodes via a physical wire. The data link layer provides the means in which data packets are transmitted from one node to another.
Suppose two computers (A & B) are directly connected through Ethernet cable. A is sending data to B, the packets would be sent from computer A to computer B if computer B is free if not it would wait until computer B is not transmitting before it can start sending data packets to computer B.