1. What are hand tools ? *

On July 23, 1983, Air Canada Flight 143 required 22,300 kg of jet fuel to fly from Montreal to Edmonton. The density of jet fuel

Natasha2012 [34]

Answer:

20, 083 L

Explanation:

The mistake was the result of not using units when converting the 7862 l to Kg. They used the density in pounds hence they multiplied by 1.77 Lb/L and obtained 13597 Lb not Kg as they assumed.

To obtain the amount needed to refuel they subtracted this quantity from the 22,300 Kg required for the trip again obtaining the wrong quantity of 8703 Kg and they converted this to liters by dividing the density to get 4916 L and then placed then 5000 L of fuel

The quantity required was

7862 L * 1.77 Lb/L = 13915.74 Lb (pounds not kilos)

then converting this pounds to Kg by multiplying by 0.454 Kg/L one gets

6173 Kg on board

Amount Required

( 22,300 -6173) : 16127 Kg

16127 Kg/ 0.803 Kg/L = 20083 L

5 0

3 years ago

A turntable A is built into a stage for use in a theatrical production. It is observed during a rehearsal that a trunk B starts

lions [1.4K]

Answer:

The coefficient of static friction, μₛ, between the trunk and turntable = 0.32

Explanation:

For this motion of the trunk B,

Initial velocity, v₀ = 0

Tangential Acceleration, a = 0.28 m/s²

Time taken, t = 10s

Using equations of motion,

v = v₀ + at

v = 0 + 0.28 × 10 = 2.8 m/s

Frictional force, Fᵣ = μₛN

μₛ = coefficient of static friction,

N = Normal reaction exerted on the trunk B as a result of its weight = mg

Doing a force balance on the trunk B,

Force keeping the trunk B in circular motion must balance the frictional forces.

Force keeping the trunk B in circular motion, F = mv²/r

Fᵣ = F

μₛN = mv²/r but N = mg

μₛmg = mv²/r

μₛg = v²/r

μₛ = v²/gr

μₛ = 2.8²/(9.8 × 2.5) = 0.32

Hope this helps!!!

3 0

3 years ago

Dalton needs to prepare a close-out report for his project. Which part of the close-out report would describe

lys-0071 [83]

Answer:

Dalton

The part of the close-out report that would describe how he would plan and manage projects in the future is:

summary of project management effectiveness

Explanation:

The Project Close-out Report is a project management document, which identifies the variances from the baseline plans. These variances are specified in terms of project performance, project cost, and schedule. The project close-out report records the completion of the project and the subsequent handover of project deliverables to others. The project management effectiveness summary details the project's objectives and the achievements recorded, including the lessons learned.

4 0

2 years ago

Multiple Choice

mote1985 [20]

I think it’s manufacturing

7 0

3 years ago

2. Why are some constraints automatically applied by the software, but you must manually apply others?

hoa [83]

Answer:

It is because constraints applied automatic by the software (CAD) are supposed to control relationships and geometry between lines, arcs and circles while those manually added are supposed to control the geometry to behave in the manner the user likes the sketch to appear when drawing.

Explanation:

CAD software enables creating sketches using the program by automatic allowing geometric constraints to perform the tasks.Geometry in lines, circles, and other geometric features show collaborating relation that facilitate sketching in the program.For example, two end points appear to make lines remain perpendicular.Other geometric constraints are parallel, and equal.However, the user can manually apply geometric constraints to a sketch to force the geometry in a manner that is suitable to the sketch drawn.That is why a user must manually apply others.

7 0

3 years ago