The connector for ethernet cables is called RJ45. for phone jack is RJ11. Although they look the same, the RJ11 has only 4 leads, as opposed to 9 leads in RJ45. Also, RJ11 is not as wide as RJ45, so the connector does not fit.
Even if it would, the signals would be totally incompatible, so no success can be expected.
Answer:
The program in Python is as follows:
num1 = int(input())
num2 = int(input())
if num1 >=0 and num2 >= 0:
print(num1+num2)
elif num1 <0 and num2 < 0:
print(num1*num2)
else:
if num1>=0:
print(num1**2)
else:
print(num2**2)
Explanation:
This gets input for both numbers
num1 = int(input())
num2 = int(input())
If both are positive, the sum is calculated and printed
<em>if num1 >=0 and num2 >= 0:</em>
<em> print(num1+num2)</em>
If both are negative, the products is calculated and printed
<em>elif num1 <0 and num2 < 0:</em>
<em> print(num1*num2)</em>
If only one of them is positive
else:
Calculate and print the square of num1 if positive
<em> if num1>=0:</em>
<em> print(num1**2)</em>
Calculate and print the square of num2 if positive
<em> else:</em>
<em> print(num2**2)</em>
I would go straight to the bank and have it reported along with the police.
Answer:
c-Either A or B
Explanation:
The non-inverting amplifier usually has the input voltage connected to the non-inverting input while the inverting input is connected to the output.
Both the unit gain amplifier and the voltage follower have an input voltage connected to the non-inverting input, and the inverting input connected to the output, so both are special cases of the non-inverting amplifier.
The correct answer is
c-Either A or B
