Answer:
Because the LAN has a DHCP server configured in it.
Explanation:
DHCP stands for Dynamic Host Configuration Protocol and its a client/server protocol that assigns an IP address and other configuration parameters to automatically connect a computer to the network and start browsing the internet
Answer:
introduction
malware
SECURITY
RANSOMWARE
encryption
technology
CIPHER TEXT
INFORMATION
Explanation:
See the reference to the website in the comments.
Answer:
10
Explanation:
An enqueue operation is a function that adds an element(value) to a queue array. A dequeue operations removes an element from a queue array. Queue arrays follow a first-in-first-out approach, so elements that are first stored in the queue are removed/accessed first(enqueue operations add elements at the rear of the queue array).
The following operations leave 10 elements in the queue of array size 12 after its done:
10 enqueue operations= adds 10 elements
5 dequeue operations= removes 5 elements( 5 elements left in queue)
6 enqueue operations= adds 6 elements(11 elements in queue)
10 dequeue operations= removes 10 elements(1 element left in queue)
8 enqueue operations= adds 8 elements(9 elements in queue)
2 dequeue operations= removes 2 elements(7 elements left in queue)
3 enqueue operations= adds 3 elements(10 elements in queue)
Therefore there are 10 elements in the queue after enqueue and dequeue operations.
So if you’re asking what APA style is it’s a style of a bibliography (a paragraph giving credit to a source eg. Article, Website etc.) used for research papers. So you would go to an APA style website (I have used EZBIB free APA style format which can be found using a specific wording in a google search) and then enter in the information it asks you for like author, time updated, etc. Then copy what the paragraph it gives you and paste it to your research paper.
Answer:
Answered below
Explanation:
#Program is written in Python.
sq_feet = int(input ("Enter paint area by square feet: ")
gallons = float(input (" Enter number of gallons: ")
paint_job_cost(sq_ft, gallons)
#Function
def paint_job_cost(sq_ft, gal){
gallon_cost = 0
cost_per_hour = 35
if sq_ft <= 2000:
gallon_cost = 9.53
else:
gallon_cost = 10.50
paint_cost = gal * gallon_cost
labour_hours = 8 * (sq_ft/112)
total_labour_cost = labour_hours * cost_per_hour
hazard_fee = 0.075 * paint_cost
total_cost = paint_cost + total_labour_cost + hazard fee
print (paint_cost)
print(labour_hours)
print (total_labour_cost)
print (hazard_fee)
print(total_cost)
}