Turn the revolving turret (2) so that the lowest power objective lens (eg. 4x) is clicked into position.
Place the microscope slide on the stage (6) and fasten it with the stage clips.
Look at the objective lens (3) and the stage from the side and turn the focus knob (4) so the stage moves upward. Move it up as far as it will go without letting the objective touch the coverslip.
Look through the eyepiece (1) and move the focus knob until the image comes into focus.
Adjust the condenser (7) and light intensity for the greatest amount of light.
Move the microscope slide around until the sample is in the centre of the field of view (what you see).
Use the focus knob (4) to place the sample into focus and readjust the condenser (7) and light intensity for the clearest image (with low power objectives you might need to reduce the light intensity or shut the condenser).
When you have a clear image of your sample with the lowest power objective, you can change to the next objective lenses. You might need to readjust the sample into focus and/or readjust the condenser and light intensity. If you cannot focus on your specimen, repeat steps 3 through 5 with the higher power objective lens in place. Do not let the objective lens touch the slide!
When finished, lower the stage, click the low power lens into position and remove the slide.
Your microscope slide should be prepared with a coverslip over the sample to protect the objective lenses if they touch the slide.
Do not touch the glass part of the lenses with your fingers. Use only special lens paper to clean the lenses.
Always keep your microscope covered when not in use.
Always carry a microscope with both hands. Grasp the arm with one hand and place the other hand under the base for support.
Answer:
<u>The heavier the hummingbird, the fewer times its wing will beat per second. </u>
Explanation:
There is a negative slope in a graph respective to the components of the x and y axis. Therefore, heavier the hummingbird -> less beats per second.
The greatest issue facing
society that results from the development of new applications of cell
technology is that it can make the arteries narrower especially for patients
with heart diseases. Although cell technology has been revealed as an ideal
cure for heart related diseases.
The answer to this question is "fluid mosaic model". We are being asked the question above and the complete sentence is below:
The contemporary description of the membrane structure of a cell is commonly known as the FLUID MOSAIC MODEL.
Answer:
red blood cells (RBCs) misfolding and convert in sickle shapevfrom the donut with out hole shape.