Answer:
It may not be at the sea level
Explanation:
The reason here is water only boils at sea level. This means that if you move water to a different height, say top of a mountain, the boiling temperature of water would change. This is due to the pressure drop at high place. The drop of pressure would make it harder to transform water liquid to gas, thus requiring more temperature.
Answer:
B. w=12.68rad/s
C. α=3.52rad/s^2
Explanation:
B)
We can solve this problem by taking into account that (as in the uniformly accelerated motion)
( 1 )
where w0 is the initial angular speed, α is the angular acceleration, s is the arc length and r is the radius.
In this case s=3.7m, r=16.2cm=0.162m, t=3.6s and w0=0. Hence, by using the equations (1) we have


to calculate the angular speed w we can use
Thus, wf=12.68rad/s
C) We can use our result in B)

I hope this is useful for you
regards
Answer:
Crumple zones are designed to absorb and redistribute the force of a collision. ... Also known as a crush zone, crumple zones are areas of a vehicle that are designed to deform and crumple in a collision. This absorbs some of the energy of the impact, preventing it from being transmitted to the occupants.
The correct answer is D. Amount of time and area of physical contact between the substances.
Explanation:
Heat transfer refers to the flow of thermal energy or heat between two or more objects. This process involves multiple factors and implies heat from the hottest object goes to the coldest one until there is an equilibrium. To begin, heat transfer depends on the amount of thermal energy in the objects because objects must have a different amount of thermal energy for heat to flow.
Besides this, the amount of energy that flows depends on the time and the contact between the substances of objects. Indeed, objects need to be in contact or close to each other for heat to transfer, and the time needs to be enough for the process to occur. For example, if you place a pot over the fire just for a few seconds it is likely the heat transferred is minimal, which does not occur if you leave the pot more time. At the same time if the pot is in close contact with fire more heat will be transferred.-
Answer:
the glove could be heavy so slowing down his power
Explanation:
JUST GUESSED