Appreciative question! All the printer users must be know these of seven steps that to be know before using printer. Although any of skip step can be occur troublesome for your printer and of course your print jobs. But don't worry for all printer issue, I suggest that Epson Printers Support which definitively helpful for regular printer users! For more visit here https://www.printererrorrepair.com/epson-printer-support/
T<span>he seven steps used by a laser printer to print a page are : </span>1) Processing, this is where he computer sends the data to the printer. 2) Charging, where <span>the wire (primary corona) negatively charges the photoconductive drum.</span> 3) Exposing, where <span>the laser scans the image to the drum. Anywhere the laser touches the drum causes the electrical charge to drain off.</span> 4) Developing, where <span>negatively charged toner particles are allowed to attach to the painted area of the drum; since the negative charge has been drained off these areas</span> 5) Transferring, where the transfer corona wire charges the paper with a positive charge from behind. The negatively charged toner jumps to the positive paper, according to the image on the drum. <span>A Static Charge eliminator then removes any residual charge. </span>6) Fusing, where t<span>he toner particles attached to the paper are fused or melted to the paper, because of the heated drum.</span> 7) Cleaning, where t<span>he drum is cleaned of excessive toner and electrical charges.</span>
