If both bars are made of a good conductor, then their specific heat capacities must be different. If both are metals, specific heat capacities of different metals can vary by quite a bit, eg, both are in kJ/kgK, Potassium is 0.13, and Lithium is very high at 3.57 - both of these are quite good conductors.
If one of the bars is a good conductor and the other is a good insulator, then, after the surface application of heat, the temperatures at the surfaces are almost bound to be different. This is because the heat will be rapidly conducted into the body of the conducting bar, soon achieving a constant temperature throughout the bar. Whereas, with the insulator, the heat will tend to stay where it's put, heating the bar considerably over that area. As the heat slowly conducts into the bar, it will also start to cool from its surface, because it's so hot, and even if it has the same heat capacity as the other bar, which might be possible, it will eventually reach a lower, steady temperature throughout.
I’m assuming we’re suppose to get some kind of graph but, Instantaneous speed is the speed that is happening right now. Like driving a car at 15k/h. The instantaneous speed of the car 15k/h. On the graph, at 5s. Wherever the line is, will tell you what the speed is.
The longest wavelength in the Molecule's absorption spectrum is 2250nm
Answer:
a,b,c,e,d
Explanation:
The typical approach by the scientists use to understand the physical world includes the following steps:
Identifying a Problem
Researching the Information
Stating a Hypothesis (Possible Solution)
Testing the Hypothesis
Gather Data
Analysis of the Data
Stating a Conclusion
Publishing the Result
Therefore, according to the question the correct order would be:
a. Observation of physical world.
b. Create hypothesis about observation.
c. Test consequences of hypothesis
e. Adjust results to agree with popular opinion
d. Report outcome
Answer:
so rate constant is 4.00 x 10^-4 
Explanation:
Given data
first-order reactions
85% of a sample
changes to propene t = 79.0 min
to find out
rate constant
solution
we know that
first order reaction are
ln [A]/[A]0 = -kt
here [A]0 = 1 and (85%) = 0.85 has change to propene
so that [A] = 1 - 0.85 = 0.15.
that why
[A] / [A]0= 0.15 / 1
[A] / [A]0 = 0.15
here t = (79) × (60s/min) = 4740 s
so
k = - {ln[A]/[A]0} / t
k = -ln 0.15 / 4740
k = 4.00 x 10^-4
so rate constant is 4.00 x 10^-4
