Answer:
Step-by-step explanation:
2x - y > 4 ⇒ y < 2x - 4
x + y < - 1 ⇒ y < - x - 1
What is the perimeter of the figure shown above? a. 10 cm c. 15 cm b. 20 cm d. 19 cm
2 answers:
You might be interested in
Answer: second option.
Step-by-step explanation:
Given the transformation →
You must substitute the x-coordinate of the point A (which is ) and the y-coordinate of the point A (which is
) into
to find the x-coordinate and the y-coordinate of the image of the point A.
Therefore, you get that the image of A(2,-1) is the following:
You can observe that this matches with the second option.
The dashed line is because the sign is greater than to be a solid line it has to be equal to or greater than and to the shading means any point on there works for the equation easiest way to test where you should shade is by plugging into the equation the point (0,0)
Answer:
The cost of the material for the full-sized pad is;
d) 222,750.00
Step-by-step explanation:
The parameters of the steel pad and the scale model are;
The volume of the deck = 18 yd³
The dimensions of the model of the same material = 6 feet by 4.5 feet and 4.5 inches thick
The weight of the sample, m₂ = 75 lbs
The cost of the steel, P = $55/lb
The dimensions of the sample in yards are;
6 feet = 2 yards, 4.5 feet = 1.5 yards, and 4 inches = 0. yards
The volume of the sample, V₂ = 2 yd. × 1.5 yd. × 0. yd. = (1/3) yd.³
The density of the sample material, ρ = m₂/V₂
∴ The density of the sample material, ρ = 75 lbs/((1/3)yd.³) = 225 lbs/yd³
Therefore, the density of the material of the pad, ρ = 225 lbs/yd³
The mass of the steel pad, m₁ = ρ × V₁
∴ The mass of the steel pad, m₁ = 225 lbs/yd³ × 18 yd³ = 4,050 lbs
The cost of the material for the full-sized steel pad, C = m₁ × P
∴ C = 4,050 lbs × $55/lb = $222,750