A column in a building is subjected to the following load effects:

Are front-end engineers starting to decline in China?

laiz [17]

Yes. They are declining in China. Very fast

7 0

3 years ago

What is the value of the work interaction in this process?

Cloud [144]

Answer:

The answer is " $-121\ \frac{KJ}{Kg}$ ".

Explanation:

Please find the correct question in the attachment file.

using formula:

$\to W=-P_1V_1+P_2V_2 \\\\When \\\\\to W= \frac{P_1V_1-P_2V_2}{n-1}\ \ or \ \ \frac{RT_1 -RT_2}{n-1}\\\\$

$W =\frac{R(T_1 -T_2)}{n-1}\\\\$

$=\frac{0.287(25 -237)}{1.5-1}\\\\=\frac{0.287(-212)}{0.5}\\\\=\frac{-60.844}{0.5}\\\\=-121.688 \frac{KJ}{Kg}\\\\=-121 \frac{KJ}{Kg}\\\\$

7 0

3 years ago

Why might construction crews want to install pipes before the foundation is poured

Crazy boy [7]

The answer is choice C

Explanation:

As during construction ,the site is cleared for all debris before laying out the foundation. Even the sewer lines are dug out .

So it will be useful for the construction crews to connect the pipes to the sewer lines before the foundation is poured.

But usually the steps take in construction activity is:- first the site is cleared for the foundation to be poured and once the foundation wall is set , then all utilities , including plumbing and electrical activities are done.,

After this process is over, the city inspector comes to check whether the foundation has been laid down as per the code of construction.

Only after that the rest of the construction activity follows through.

3 0

4 years ago

Consider a Carnot heat pump cycle executed in a steady-flow system in the saturated mixture region using R-134a flowing at a rat

attashe74 [19]

Answer:

7.15

Explanation:

Firstly, the COP of such heat pump must be measured that is,

$COP_{HP}=\frac{T_H}{T_H-T_L}$

Therefore, the temperature relationship, $T_H=1.15\;T_L$

Then, we should apply the values in the COP.

$=\frac{1.15\;T_L}{1.15-1}$

$=7.67$

The number of heat rejected by the heat pump must then be calculated.

$Q_H=COP_{HP}\times W_{nst}$

$=7.67\times5=38.35$

We must then calculate the refrigerant mass flow rate.

$m=0.264\;kg/s$

$q_H=\frac{Q_H}{m}$

$=\frac{38.35}{0.264}=145.27$

The $h_g$ value is 145.27 and therefore the hot reservoir temperature is 64° C.

The pressure at 64 ° C is thus 1849.36 kPa by interpolation.

And, the lowest reservoir temperature must be calculated.

$T_L=\frac{T_H}{1.15}$

$=\frac{64+273}{1.15}=293.04$

$=19.89\°C$

the lowest reservoir temperature = 258.703 kpa

So, the pressure ratio should be = 7.15

8 0

3 years ago

On-site oil storage containers must be marked "Used Oil."<br><br> True. <br><br> False.

Scrat [10]

Answer:

How must used oil storage containers be marked? Containers and aboveground tanks used to store used oil at generator facilities must be labeled or marked clearly with the words “Used Oil" (40 CFR Section 279.22(c)).

Explanation:

i think it will help you

7 0

3 years ago