Answer:
Amperes WB =<em> </em>
Explanation:
Amperes will flow back to the negative terminal because both the positive terminal and negative terminal contain the equivalent amount of current that will flow and it works in the starter motor.
To learn more about it, refer
to brainly.com/question/6561461
#SPJ4
Answer:
critical stress required for the propagation is 27.396615 × N/m²
Explanation:
given data
specific surface energy = 0.90 J/m²
modulus of elasticity E = 393 GPa = 393 × N/m²
internal crack length = 0.6 mm
to find out
critical stress required for the propagation
solution
we will apply here critical stress formula for propagation of internal crack
( σc ) = .....................1
here E is modulus of elasticity and γs is specific surface energy and a is half length of crack i.e 0.3 mm = 0.3 × m
so now put value in equation 1 we get
( σc ) =
( σc ) =
( σc ) = 27.396615 × N/m²
so critical stress required for the propagation is 27.396615 × N/m²
Answer:
a)
b)
Explanation:
Given that:
diameter d = 12 in
thickness t = 0.25 in
the radius = d/2 = 12 / 2 = 6 in
r/t = 6/0.25 = 24
24 > 10
Using the thin wall cylinder formula;
The valve A is opened and the flowing water has a pressure P of 200 psi.
So;
b)The valve A is closed and the water pressure P is 250 psi.
where P = 250 psi
The free flow body diagram showing the state of stress on a volume element located on the wall at point B is attached in the diagram below
