Which are factors that go into a project plan? choose four answers

Computers and Technology

1 answer:

vaieri [72.5K]4 years ago

6 0

Answer:

The answer to this question is given below in the explanation section.

Explanation:

The four factors that go into project plan are:

Scope
Outcome
Benchmark and
Role.

The four factors key components of any project plan. without these factors project plan is incomplete. Because, the project has scope and output, the benchmark that is going to be achieved and role and responsibilities for doing specific tasks etc.

You might be interested in

Describe two ways that using frames helps move data along a network

Helen [10]

Frames move bigger amounts of data through the network thus making it faster.

3 0

3 years ago

The _______ command was developed by nicholas harbour of the defense computer forensics laboratory.

Lena [83]

Hi! The answer is dcfldd

3 0

3 years ago

Good HTML skills will be required in order to prevent what from happening in the design of a web page?

Verizon [17]

Answer:

to properly use the tags in the web page

Explanation:

The full form HTML is Hyper Text Mark up Language. HTML is used in designing a good web page in the computer. It is used to design the document that are displayed in the web browser.

Instead of using a programming language to do the functions of a web page, the markup language uses the tags to identify the different types of the contents and purposes that they serve in the web page. A good HTML skills are required to prevent the web page from any improper designing of the contents in the web page.

5 0

3 years ago

If your TV was showing a flat black or blue screen, or had "snow", what steps would you take to fix it?

faust18 [17]

Answer:

Assuming that TV was working fine and it stopped working when you restart or after power shutdown. Flat Black or blue screen or snow are all seems to be having HDMI cable sync issues. It can be fixed based on the model of the TV and connectivity it is using.

I would suggest to start with very basic step and should go step by step unless we narrow down the problem.

Turn off all the components, unplug the cables and plug them back by leaving HDMI cables intact. So this process will reset all the units and may help in renegotiation.
Plug all the cables and Turn on the TV. Plug all other components like sound receiver and source device and Turn on the power. This may solve the problem.
If issue still persist. Unplug and Plug back HDMI cables and surrounding components in HDMI path. It may solve the issue.
If the issue still persists, then change the HDMI cable itself and try rebooting all components.
If input is changed then it might have caused the issue. So identify the cable from the receiver to the TV. figure out its input and change the TV input to that value and it will work.
In some TV's if power reset happens, It may revert to TV mode then change the video input based on your TV model.
If the receiver is connected to TV via Coax then change the channel as per TV guide.
If the receiver and its component is using AV or HDMI then use TV remote to change the input source until correct feed is found.
If issue still persist, check the cable with another TV and see if it works. If its not then cable is at fault.
If the cable is fine then change the TV and try above steps.If it works then TV is at fault.

Explanation:

8 0

4 years ago

Go to the Subset tab, which gives a subset of randomly chosen data from the first tab. Go to your Math Tools and open the Graph

Karo-lina-s [1.5K]

A linear regression model is used to show the relationship between variables on a scatter plot

The equation of the linear regression model is: $\^y = 1.56\^x + 1.29$ and the correlation coefficient is 0.8034