Complete Question
The complete question is shown on the first uploaded image.
Answer:
The answer is shown on the second uploaded image
Explanation:
The explanation is also shown on the second uploaded image
Answer: The rate of heat transfer decreases.
Explanation:
Fin effectiveness is defined as the ratio of heat transfer rate from a finned surface to the heat transfer rate from the same surface if there were no fins. Its value is expected to be greater than 1.
Having effectiveness value of 0.9 which is less than 1 indicates that the heat transfer rate will decrease since a fin effectiveness smaller than 1 shows that the fin acts as insulation (thermal insulation).
A formal indication from a state, on letterhead, or an official state form, which shows that an applicant has valid driving privileges and is clear to apply for a Colorado driver's license is called a clearance.
<h3>What is a learner's license?</h3>
A learner's license is also referred to as learner's permit and it can be defined as a category of driver's license that is issued to an individual who is learning how to drive an automobile vehicle (car).
<h3>What is a license?</h3>
A license is also referred to as a certificate and it can be defined as an authorization that is typically issued by state governments to a driver, so as to avail him or her the legal ability to physically driver in all the states across a country.
In this scenario, we can infer and logically deduce that a clearance is a formal indication from a state which shows and affirms that an applicant has valid driving privileges, and is permitted to apply for a Colorado driver's license.
Learn more about learner's license here: brainly.com/question/26289148
#SPJ1
complete question
A certain amplifier has an open-circuit voltage gain of unity, an input resistance of 1 \mathrm{M} \Omega1MΩ and an output resistance of 100 \Omega100Ω The signal source has an internal voltage of 5 V rms and an internal resistance of 100 \mathrm{k} \Omega.100kΩ. The load resistance is 50 \Omega.50Ω. If the signal source is connected to the amplifier input terminals and the load is connected to the output terminals, find the voltage across the load and the power delivered to the load. Next, consider connecting the load directly across the signal source without the amplifier, and again find the load voltage and power. Compare the results. What do you conclude about the usefulness of a unity-gain amplifier in delivering signal power to a load?
Answer:
3.03 V 0.184 W
2.499 mV 125*10^-9 W
Explanation:
First, apply voltage-divider principle to the input circuit: 1
*5
= 4.545 V
The voltage produced by the voltage-controlled source is:
A_voc*V_i = 4.545 V
We can find voltage across the load, again by using voltage-divider principle:
V_o = A_voc*V_i*(R_o/R_l+R_o)
= 4.545*(100/100+50)
= 3.03 V
Now we can determine delivered power:
P_L = V_o^2/R_L
= 0.184 W
Apply voltage-divider principle to the circuit:
V_o = (R_o/R_o+R_s)*V_s
= 50/50+100*10^3*5
= 2.499 mV
Now we can determine delivered power:
P_l = V_o^2/R_l
= 125*10^-9 W
Delivered power to the load is significantly higher in case when we used amplifier, so a unity gain amplifier can be useful in situation when we want to deliver more power to the load. It is the same case with the voltage, no matter that we used amplifier with voltage open-circuit gain of unity.
Typically each development platform consists of the following components except compilers and assemblers
- The platform development simply means the development of the fundamental software which is vital in making hardware work.
- Operating system: This refers to the low-level software that communicates with the hardware so that other programs can be able to run.
- System software: This is the software that's designed in order to provide a platform for the other software. Examples include search engines, Microsoft Windows, etc.
- Compilers and assemblers: Compliers are sued in converting source code to a machine-level language. Assembler is used in converting assembly code to machine code.
- Hardware platform: This is a set of hardware where the software applications are run.
In conclusion, the correct option is Compilers and assemblers.
Read related link on:
brainly.com/question/21650058
