I suppose its 7, subtracted
<u>Given</u>:
Given that ABC is a right triangle.
The length of AB is 7 units.
The measure of ∠A is 65°
We need to determine the length of AC
<u>Length of AC:</u>
The length of AC can be determined using the trigonometric ratio.
Thus, we have;
Where the value of 
is 65° and the side adjacent to the angle is AC and the side hypotenuse to the angle is AB.
Substituting the values, we have;
Substituting AB = 7, we have;
Multiplying both sides by 7, we get;
Rounding off to the nearest hundredth, we get;
Thus, the length of AC is 2.96 units.
16.5 degrees below the starting temp, whatever that is. If its 0, then -16.5 degrees.
The first equation would be (.5)5-11=-8.5, because the metal has been cooling for 5 hours.
The device that 'aids' in the cooling would be -5-3=-8, because it is a separate variable that cools the metal, so the amount the device cools is independent of the natural cooling amount, and the equation is independent of the natural cooling equation.
You then add -8.5 and -8, because the device has lowered 8.5 degrees and 8 degrees. This equals -16.5 degrees, or a decrease of 16.5 degrees.
Hey there! I'm happy to help!
To find the volume of a cone, you multiply the base by the height and then divide by three.
First, we need to find the base. A cone has a circle for the base. To find the area of a circle, we square the radius and multiply it by pi (we will use 3.14).
4²=16
16×3.14= 50.24
Now, we multiply our base by the height.
50.24×8=401.92
Finally, we divide by three.
401.92÷3≈133.973 (to nearest thousandth)
Therefore, the volume of the cone is about 133.973 units cubed. If you were to use exact pi, it would be more like 134 because of all those decimals after pi!
Now you can find the volume of cones!
I hope that this helps! Have a wonderful day!
