go down to (0, -9) on the graph, from there go up four and over one and plot the next point, up four over one again, and repeat
Answer:
AFH, BFG, CDG, EFG
Step-by-step explanation:
Please check the point position with your question, if there is any difference... the way to find out a right angle triangle is just like the attached picture.
Answer:
surface area is 39
Step-by-step explanation:
add the areas of each geometric figure making up the composite 3D figure.
first 3D figure
2+2+6+6
=16---eq 1
from third 3D figure
4+4+10+5
= 23
from 1 and 2
16+23
= 39
may be!! I'm not sure bout this answer
Answer:
The other side was decreased to approximately .89 times its original size, meaning it was reduced by approximately 11%
Step-by-step explanation:
We can start with the basic equation for the area of a rectangle:
l × w = a
And now express the changes described above as an equation, using "p" as the amount that the width is changed:
(l × 1.1) × (w × p) = a × .98
Now let's rearrange both of those equations to solve for a / l. Starting with the first and easiest:
w = a/l
now the second one:
1.1l × wp = 0.98a
wp = 0.98a / 1.1l
1.1 wp / 0.98 = a/l
Now with both of those equalling a/l, we can equate them:
1.1 wp / 0.98 = w
We can then divide both sides by w, eliminating it
1.1wp / 0.98w = w/w
1.1p / 0.98 = 1
And solve for p
1.1p = 0.98
p = 0.98 / 1.1
p ≈ 0.89
So the width is scaled by approximately 89%
We can double check that too. Let's multiply that by the scaled length and see if we get the two percent decrease:
.89 × 1.1 = 0.979
That should be 0.98, and we're close enough. That difference of 1/1000 is due to rounding the 0.98 / 1.1 to .89. The actual result of that fraction is 0.89090909... if we multiply that by 1.1, we get exactly .98.
