Answer:
hello your question is incomplete attached below is the complete question
answer: There is a hydraulic jump
Explanation:
First we have to calculate the depth of flow downstream of the gate
y1 = ----------- ( 1 )
Cc ( concentration coefficient ) = 0.61 ( assumed )
Yg ( depth of gate opening ) = 0.5
hence equation 1 becomes
y1 = 0.61 * 0.5 = 0.305 m
calculate the flow per unit width q
q = Q / b ----------- ( 2 )
Q = 10 m^3 /s
b = 2 m
hence equation 2 becomes
q = 10 / 2 = 5 m^2/s
next calculate the depth before hydraulic jump y2 by using the hydraulic equation
answer : where y1 < y2 hence a hydraulic jump occurs in the lined channel
attached below is the remaining part of the solution
Answer:
Of course music plays crucial role
Answer:
=0.60
Explanation:
Given :Take =1.4 for air
=r ⇒ r=16
As we know that
So
=909.42K
Now find the cut off ration
So efficiency of diesel engine
Now by putting the all values
So =0.60
So the efficiency of diesel engine=0.60
Answer:
a. Heat removal rate will increase
b. Heat removal rate will decrease
Explanation:
Given that
One end of rod is connected to the furnace and rod is long.So this rod can be treated as infinite long fin.
We know that heat transfer in fin given as follows
We know that area
Now when diameter will triples then :
So the new heat transfer will increase by 3 times.
Now when copper rod will replace by aluminium rod :
As we know that thermal conductivity(K) of Aluminium is low as compare to Copper .It means that heat transfer will decreases.
Answer:
D) Three-pronged plug
Hope it helps u!