Answer:
Shows the programming checking if num1 is greater than num2
Explanation:
So num1 and num2 are inputs
for you to code this you would need to put
num1=int(input("What is your first number? ))
and the same for num2 except change num1 for num 2 and first for second
When the input is completed, the computer will check if num 1 is greater than num2
it will do this by using a code something like:
if num1>num2:
Print("Your first input was greater than your second")
But in this example if it greater it just ends
But if it was less than you would put
if num1>num2:
Print("Your first input was greater than your second")
elif num1<num2:
Print("Your first input is less than your second")
So basically this code shows the computer checking if one number is greater than the other or not
Answer:
Simple Network Management Protocol
Explanation:
Simple Network Management Protocol otherwise referred to as SNMP is a form of computer protocol that is mainly used in obtaining and regulating information relating to connected gadgets. It is practically based on the internet and was originally planned as an interim protocol.
Hence, it can be concluded that the Simple Network Management Protocol was developed as an interim management protocol with OSI as the ultimate network management protocol.
Answer: For best performance and lowest latency, the MMU and CPU should support hardware ... broadcast, and subnet broadcast traffic with the deny-all catch-all filter rule for ... Please refer to the NetSight Wireless Manager User Guide (v5.1 or higher ) for a ... The rule must also be positioned above the 'Deny All' Default action.
Explanation:
Answer:
not appropriate use of technology.
Explanation:
