Answer:
The force will be "125 N".
Explanation:
The given values are:
As we know,
⇒
then,
⇒
⇒
Since,
The pressure on both the pistons are equal, then
⇒
or,
⇒
By substituting the values, we get
⇒
⇒
⇒
⇒
⇒
Answer:
The fluid property responsible for the development of velocity boundary layer is majorly the fluid's viscosity.
For non-viscous fluids (in theory, because no fluid is entirely non-viscous), there will be no velocity boundary layer.
Explanation:
The velocity boundary layer is the thin layer of viscous fluid that is in direct contact with the pipe surface. The velocity of fluid in this layer is 0 as fluid doesn't move in this layer.
This phenomenon is due to the viscosity of the fluid. Viscosity of the fluid refers to the internal friction that exists between fluid layers, so, the layer of fluid in contact with non-moving, static surface of the pipe experiences friction that causes this layer to not move, causing the fluid velocity to vary from 0 at this surface to the maximum value at the centre of the pipe, before the velocity begins to drop again until it reaches 0 at the other end of the circular pipe.
Since viscosity is the primary cause of this, non-viscous or inviscid fluids are saved from this phenomenon as their flows do not have the velocity boundary layer.
Although, a completely non-viscous or inciscid fluid is an idealized concept because all fluids will experience some sort of viscosity (no matter how small) between their fluid layers. Hence, a velocity boundary layer, no matter how thin (or of minute thickness), will exist in the flow of real fluids.
But, an idealized non-viscous or inviscid fluid will not have a velocity boundary layer.
Hope this Helps!!!
Answer: Starting of with Chemical Engineering something that they may encounter is a lack of adeptness man puissance. People that are working there are not much adept or having cognizance regarding to chemical industry. Something someone with a Civil engineering might encounter is the quandary of sustainable construction, and amendment construction site safety. To go on , something that Electrical engineering might encounter is a Non technical , Virtually an electrical engineer has to deal with an astronomical range of machines , control panels,instruments. For example you are working with circuit breakers,as anon as you’ll have expertise on any particular type of circuit breaker, there's a transmutation in trend and the CB you are working with is already obsolete. And last but no least , Something someone might encounter while doing Mechanical engineering is there toxic substances because their work environment is susceptible to fires, explosions, structural failures and equipment malfunctions.
Answer:
Gravity
Explanation:
It attracts bodies to each other
Answer:
A rule with tapered end
Explanation:
When measuring the depth of a drilled hole that has a small diameter, you should measure at the outside wall of the hole to get the full depth of the diameter part called full diameter depth measurement. However, a depth micrometer can be used to get the measurement.