An internal node is a node which carries at least one child or in other words, an internal node is not a leaf node.
Simplex, simplex, and half duplex.
Hope this helps!!
Answer:
Canada launched the national Generation Energy Council of leading Canadians, who proposed principles to the Government of Canada on how to build our energy future. Today, these principles guide government decisions to support Canadian families, businesses, and communities. Together, we are: saving energy powering clean communities.
Explanation:
Answer:
Ping the other workstations from the IT Admin workstation to confirm that connection has been lost, check the status of the network interface card in the workstation with command ifconfig in the terminal, then reset the connection using ifdown and ifup commands. If the problem is not resolved, check the cable connection.
Explanation:
Ping is an ICMP echo message sent by a network host to another to check for connectivity. If they are connected, the other workstation responds with an ICMP response message.
The ifconfig in Linux systems displays the network adapters and their individual IP configurations. If there is no connection even after the network is reset, then the cable connectors could be the problem.
Answer:
Link-local address
Explanation:
IP addresses that have "FE80" as the hexadecimal representation of their first 10 bits are IPV6 reserved addresses for link-local unicast addressing. These addresses are automatically configured (though may be manually configured too) on any interface and should not be routed. They are used for addressing on a single link with the main aim, among others, of automatic configuration and routing protocol advertisement. Devices attached to this link can be accessed or reached using the link-local addresses as they don't need a global address to communicate.
However, routers will not forward datagram or packets using link-local addresses. In other words, routers are not allowed to connect to the internet using the unicast link-local addresses.
