All categories

3 years ago

BRAINLIEST

Engineering

1 answer:

Luba_88 [7]3 years ago

7 0

A because it is like google docs when you first open a document you start with a blank page

You might be interested in

A driver complains that his front tires are wearing

Margarita [4]

Answer:

The correct option is;

Neither A nor B

Explanation:

The location of the where the thread wears in tire that has too high inflation is at the thread pattern center due to the reduced size of the contact patch with the load of the car resting on the central portion of the tire's contact surface

When the wear occurs at the outer edges of the tire, the load of the car rests on the outer edges as the contact patch increases due to the tire being under-inflated

Camber is the slope provided in road pavement to drain off water from the road

Roads with camber has a raised middle portion and wear due to camber includes outer-edge tread wear, inner-edge tread wear and tire feathering

8 0

3 years ago

When it comes to making a good impression in a work setting, it does not apply to an initial contact, since both people are meet

Art [367]

Answer:

you have only seconds in which a person will accept or reject an employee or firm

Explanation:

First impression matters that's why when looking for employment with an organisation, lack of a tie for men may lead to automatic rejection. You have to be smart both intellectually and physically. Therefore, it means that you have only seconds in which a person will accept or reject an employee or firm.

4 0

3 years ago

Three capillary tubes with different radius (r1=1.0mm, r2=0.1mm, r3=0.01mm) are inserted into the same cup of water. The surface

kobusy [5.1K]

Answer:

you fgykyiihohuoououu

Explanation:

jjj

4 0

3 years ago

Reverse masking forms a soft edge on the panel.

valina [46]

True I think I’m not sure?

7 0

2 years ago

Consider the expansion of a gas at a constant temperature in a water-cooled piston-cylinder system. The constant temperature is

Leona [35]

Answer:

$Q_{in} = W_{out} = nRT ln (\frac{V_{2}}{V_{1}})$

Explanation:

According to the first thermodynamic law, the energy must be conserved so:

$dQ = dU - dW$

Where Q is the heat transmitted to the system, U is the internal energy and W is the work done by the system.

This equation can be solved by integration between an initial and a final state:

(1) $\int\limits^1_2 {} \, dQ = \int\limits^1_2 {} \, dU - \int\limits^1_2 {} \, dW$

As per work definition:

$dW = F*dr$

For pressure the force F equials the pressure multiplied by the area of the piston, and considering dx as the displacement:

$dW = PA*dx$

Here A*dx equals the differential volume of the piston, and considering that any increment in volume is a work done by the system, the sign is negative, so:

$dW = - P*dV$

So the third integral in equation (1) is:

$\int\limits^1_2 {- P} \, dV$

Considering the gas as ideal, the pressure can be calculated as $P = \frac{n*R*T}{V}$ , so:

$\int\limits^1_2 {- P} \, dV = \int\limits^1_2 {- \frac{n*R*T}{V}} \, dV$

In this particular case as the systems is closed and the temperature constant, n, R and T are constants:

$\int\limits^1_2 {- \frac{n*R*T}{V}} \, dV = -nRT \int\limits^1_2 {\frac{1}{V}} \, dV$

Replacion this and solving equation (1) between state 1 and 2:

$\int\limits^1_2 {} \, dQ = \int\limits^1_2 {} \, dU + nRT \int\limits^1_2 {\frac{1}{V}} \, dV$

$Q_{2} - Q_{1} = U_{2} - U_{1} + nRT(ln V_{2} - ln V_{1})$

$Q_{2} - Q_{1} = U_{2} - U_{1} + nRT ln \frac{V_{2}}{V_{1}}$

The internal energy depends only on the temperature of the gas, so there is no internal energy change $U_{2} - U_{1} = 0$ , so the heat exchanged to the system equals the work done by the system:

$Q_{in} = W_{out} = nRT ln (\frac{V_{2}}{V_{1}})$

4 0

4 years ago