The system of two rods will lie on the table as show in the figure
The center of first rod will lie exactly at the edge of first rod and then the center of mass of two combined rods will lie at the edge of the table.
So now the whole system will rest on the rod and it will not tipping off.
Since both rods are identical so we can say that the system will have its center of mass at the mid point on the line joining the two centers
So the value of x will be at mid point of line joining the two points on rod
So total length over the edge will be given as
The statement above is true. The phase of matter which is exposed to normal atmospheric pressure is indeed solely dependent upon temperature. If the matter is exposed to the normal atm pressure, its temperature depends on it.
Answer:
Exposure time limitation, shielding and distance.
Explanation:
- Limitation of exposure time, since the dose received is directly proportional to the exposure time, so that, at a shorter time, lower dose. For this reason, planning is suggested, to reduce time.
-
Use of shields. This allows a reduction in the dose received by the technician when filtered by the barrier (screen). There are two types of shields or screens, the primary barriers (attenuate the radiation of the primary beam) and the secondary barriers (avoid diffuse radiation).
-
Distance to the radioactive source. The dose received is inversely proportional to the square of the distance to the radioactive source. Therefore, if the distance is doubled, the dose received will decrease by a quarter. Reason for this, it is advisable to use devices or remote controls whenever possible.
No. That's the description of the wave's 'frequency'.
Refraction of a wave is its behavior when it crosses
the boundary between two different media.
