Answer:
C. A and B
Explanation:
The switch was never been configured with VLANs before and the VTP also has been disabled.So by issuing the vlan 22 command and Hannahs-VLAN command.VLAN 22 will be listed in the output of the show vlan brief command and VLAN 22 will be llisted in the output of the show running - config command.Hence the answer is option C. (A and B) .
Answer:
- common = []
- num1 = 8
- num2 = 24
- for i in range(1, num1 + 1):
- if(num1 % i == 0 and num2 % i == 0):
- common.append(i)
- print(common)
Explanation:
The solution is written in Python 3.
Firstly create a common list to hold a list of the common factor between 8 and 24 (Line 1).
Create two variables num1, and num2 and set 8 and 24 as their values, respectively (Line 3 - 4).
Create a for loop to traverse through the number from 1 to 8 and use modulus operator to check if num1 and num2 are divisible by current i value. If so the remainder of both num1%i and num2%i will be zero and the if block will run to append the current i value to common list (Line 6-8).
After the loop, print the common list and we shall get [1, 2, 4, 8]
Answer:
1) pull out the legs of the tripod to gain the required height and necessary stability
2) adjust each of the legs so that the tripod is level
3) attach the camera to the tripod
Answer:
Option(C) is the correct answer to the given question.
Explanation:
Since overall the On-Board Diagnostics of the level 2 the computer systems need to evaluate the cause of the engine failures .The malfunction significantly increases in the fuel consumption, so that we can detecting the error code in the vehicle.
- If we starting the engine as well as by using the DMM, we'll see how much battery voltage it is at the negative ignition coil node.
- If the spark module is faulty and no ignition coils can fire so all the engines are working that's why all the other option are incorrect .