Answer:
B=10
Explanation:
(-21) x 0=0 and (-50)÷(-5)=10
0+10=10
Answer:
Shows the programming checking if num1 is greater than num2
Explanation:
So num1 and num2 are inputs
for you to code this you would need to put
num1=int(input("What is your first number? ))
and the same for num2 except change num1 for num 2 and first for second
When the input is completed, the computer will check if num 1 is greater than num2
it will do this by using a code something like:
if num1>num2:
Print("Your first input was greater than your second")
But in this example if it greater it just ends
But if it was less than you would put
if num1>num2:
Print("Your first input was greater than your second")
elif num1<num2:
Print("Your first input is less than your second")
So basically this code shows the computer checking if one number is greater than the other or not
Computer Chips. / SILICON. This is just an educated guess
The answer is user EXEC mode. This is for setting, viewing, and testing system processes. In common, the user EXEC commands let you to link to remote devices, modify terminal line settings on a temporary basis, perform basic tests, and list system information. This also used by common system administrators, while the privileged EXEC mode is used by the root administrator. Use the enable and disable instructions to shift between the two levels. Access to the user-level EXEC command line needs a valid password.
Answer:
2.4GHz
Explanation:
In the 2.4 GHz band, 1, 6, and 11 are the only non-overlapping channels
