Answer:
that best describes the process is C
Explanation:
This problem is a calorimeter process where the heat given off by one body is equal to the heat absorbed by the other.
Heat absorbed by the smallest container
Q_c = m ce (
-T₀)
Heat released by the largest container is
Q_a = M ce (T_{i}-T_{f})
how
Q_c = Q_a
m (T_{f}-T₀) = M (T_{i} - T_{f})
Therefore, we see that the smaller container has less thermal energy and when placed in contact with the larger one, it absorbs part of the heat from it until the thermal energy of the two containers is the same.
Of the final statements, the one that best describes the process is C
since it talks about the thermal energy and the heat that is transferred in the process
Answer:
We can cause delamination.
Explanation:
The reason why is because the probability of causing delamination increase considerably when we use Hole-filling fasteners. If we use a typical rivet, these tends to expands in order to fill the hole.
If we analyze the force applied by the expanded rod will cause that the matrial will be deteriorated and will cause that the material to delaminate around the edges of the hole and we can cause possible control and no protection to the material.
What are the following statements? If there's one that mention a description of current action, or motion, that's your answer.
Answer:
8.40 m/s
Explanation:
Slope of the plot is 0.119
Slope of a plot is given by the change in y direction divided by the change in x direction
Here, the y axis represents inverse wavelength and the x axis represents frequency.
f = Frequency (Hz, assumed)
v = Phase velocity (m/s, assumed)
λ = Wavelength (m, assumed)
So, slope
Now,
The speed of sound travelling in the tube is 8.40 m/s
The vertical component is given by the sin of the angle. So this is 20*sin(53)=15.97m/s
