Answer:
The volume of sludge wasted each day from the secondary classifiers is Qw = 208.33 m^3 / day
Explanation:
Check the file attached for a complete solution.
The volume of the aeration tank was first calculated, V = 5000 m^3 / day.
The value of V was consequently substituted into the formula for the wasted sludge flow. The value of the wasted sludge flow was calculated to be Qw = 208.33 m^3 / day.
Given Information:
Initial temperature of aluminum block = 26.5°C
Heat flux = 4000 w/m²
Time = 2112 seconds
Time = 30 minutes = 30*60 = 1800 seconds
Required Information:
Rise in surface temperature = ?
Answer:
Rise in surface temperature = 8.6 °C after 2112 seconds
Rise in surface temperature = 8 °C after 30 minutes
Explanation:
The surface temperature of the aluminum block is given by
Where q is the heat flux supplied to aluminum block, k is the conductivity of pure aluminum and α is the diffusivity of pure aluminum.
After t = 2112 sec:
The rise in the surface temperature is
Rise = 35.1 - 26.5 = 8.6 °C
Therefore, the surface temperature of the block will rise by 8.6 °C after 2112 seconds.
After t = 30 mins:
The rise in the surface temperature is
Rise = 34.5 - 26.5 = 8 °C
Therefore, the surface temperature of the block will rise by 8 °C after 30 minutes.
Answer:
Environmental assessments (EAs) are an important component of any civil engineering project. Delgado Engineering has been contracted to design and assess a multibillion-dollar urban rail center in a city, which is divided in the middle by a river. The center will be built on a previously unused island in the center of the river. For each of the four types of civil engineers (construction engineer, geotechnical engineer, structural engineer, transportation engineer), explain why they should be involved in the project—or why they would not be relevant to the project—and what their role would be. Then describe how the EA would proceed, including what might be included in the environmental impact assessment process, such as the use of geographic information systems. Finally, explain what might be in the environmental impact statement or why you think there may be a finding of no significant impact.
Answer:
The correct option is;
Technology is not able to keep up with the demand for innovative ideas
Explanation:
The present day problems of engineering and society are mostly occurring for their first time ever or in this period and as such are complex with regard to the current state of technology and know how. For example, the problem of human induced climate change as never been faced anytime in the past history of engineering and mankind as a whole. The capacity to communicate and generate data at the current level has never been reached. The world has never the current number of individuals needing the basic necessities of life.
As such, the engineer in the competitive global job market is more than ever required to produce innovative solutions to problems rather than implement current technologies.