The answer is Newton because it can be derived from the other units.
1 Newton = 1 kg⋅m⋅s<span>−2</span>
Answer:
The velocity with which the jumper strike the mat in the landing area is 6.26 m/s.
Explanation:
It is given that,
A high jumper jumps over a bar that is 2 m above the mat, h = 2 m
We need to find the velocity with which the jumper strike the mat in the landing area. It is a case of conservation of energy. let v is the velocity. it is given by :
g is acceleration due to gravity
v = 6.26 m/s
So, the velocity with which the jumper strike the mat in the landing area is 6.26 m/s. Hence, this is the required solution.
V = t^2 - 9t + 18
position, s
s = t^3 /3 - 4.5t^2 +18t + C
t = 0, s = 1 => 1=C => s = t^3/3 -4.5t^2 + 18t + 1
Average velocity: distance / time
distance: t = 8 => s = 8^3 / 3 - 4.5 (8)^2 + 18(8) + 1 = 27.67 m
Average velocity = 27.67 / 8 = 3.46 m/s
t = 5 s
v = t^2 - 9t + 18 = 5^2 - 9(5) + 18 = -2 m/s
speed = |-2| m/s = 2 m/s
Moving right
V > 0 => t^2 - 9t + 18 > 0
(t - 6)(t - 3) > 0
=> t > 6 and t > 3 => t > 6 s => Interval (6,8)
=> t < 6 and t <3 => t <3 s => interval (0,3)
Going faster and slowing dowm
acceleration, a = v' = 2t - 9
a > 0 => 2t - 9 > 0 => 2t > 9 => t > 4.5 s
Then, going faster in the interval (4.5 , 8) and slowing down in (0, 4.5)
Forward because that's what way waves travel right
Conduction is a method of Heat transfer in solids by mutual vibration of the solid particles. The heat particle of one solid receives the heat, and transfer it to the next solid particle to it. This is as a result of the particles touching each other and by a little vibration of the particles.
A conductor is a material that allows the transfer of heat in this case. It could also allow the transfer of electrical current. Example Iron, Copper.
An insulator is a material that is poor in transfer heat or electric current from one point to another. Example is Wood.
Convection is a method of heat transfer in liquid or air medium, by the actual or bulk movement of the heated medium. E.g transfer of heat from hotter air to cooler air, transfer of heat from hotter region of boiling water to the cooler region which is at the surface.
Density is simply mass per unit volume.
Density = Mass / Volume, It's SI Unit = Kg/m3.
Does density depend on temperature?
This is a bit tricky. For liquids we should say yes, there is appreciable difference in density. For example we know that water has maximum density of 1 g/cm3 at 4 degrees Celsius.
But for solids, the density is not affected much, except at very high temperatures.
So in summary we should say Density is affected by temperature, because we know that the volume of the material would be affected and hence the density is affected likewise.
Sorry, the solution came a little bit late.
