On some late model cars, climate control systems wil create trouble codes for trouble shooting purposes.

In the engineering design process, what do engineers do immediately after brainstorming multiple solutions?

34kurt

Answer:

Iterate to improve the solution

7 0

3 years ago

A small pad subjected to a shearing force is deformed at the top of the pad 0.12 in. The heigfit of the pad is 1.15 in. What is

ser-zykov [4K]

Answer:

Shearing strain will be 0.1039 radian

Explanation:

We have given change in length $\Delta L=0.12inch$

Length of the pad L = 1.15 inch

We have to find the shearing strain

Shearing strain is given by

$\alpha =tan^{-1}\frac{\Delta L}{L}=tan^{-1}\frac{0.12}{1.15}=5.9571^{\circ}$

Shearing strain is always in radian so we have to change angle in radian

So $5.9571\times \frac{\pi }{180}=0.1039radian$

6 0

4 years ago

Determine the voltage which must be applied to a 1 k 2 resistor in order that a current of

sergey [27]

Answer:

The correct solution is "20 volt".

Explanation:

Given that:

Current,

I = 10 mA

or,

= $10\times 10^{-3} \ A$

Resistance,

R = 2 K ohm

or,

= $1\times 10^3 \ ohm$

Now,

The voltage will be:

⇒ $V=IR$

By putting the values, we get

$=10\times 10^{-3}\times 2\times 10^{3}$

$= 20 \ volt$

5 0

3 years ago

Distinguish between systems analysis and systems design?

Zielflug [23.3K]

Answer:

System analysis can be defined as a deep analysis of a part of the structure of a module that has been designed before. System design means to make any module or a part of the structure from scratch and build it completely without estimation.

Explanation:

3 0

3 years ago

f the rope is drawn toward the motor M at a speed of vM= (5t3/2) m/s, where t is in seconds, determine the speed of the cylinder

SCORPION-xisa [38]