Answer:
if it is a plastic connector it wont work but if there is metal or steel it will work
Explanation:
If I remember correctly (from my studies long time ago) the layers are from the outer to the center:
SiAl : Silicon-Aluminum
SiMa : Silicon-Magnesium (although should be Mg)
NiFe : Nickel-Iron
The SiMa layer should have the lightest elements (Magnesium is lighter than Aluminum)
I'm pretty sure its transverse waves
So, the time needed before you hear the splash is approximately <u>2.06 s</u>.
<h3>Introduction</h3>
Hi ! In this question, I will help you. This question uses two principles, namely the time for an object to fall freely and the time for sound to propagate through air. When moving in free fall, the time required can be calculated by the following equation:



With the following condition :
- t = interval of the time (s)
- h = height or any other displacement at vertical line (m)
- g = acceleration of the gravity (m/s²)
Meanwhile, for sound propagation (without sound reflection), time propagates is the same as the quotient of distance by time. Or it can be formulated by :

With the following condition :
- t = interval of the time (s)
- s = shift or displacement (m)
- v = velocity (m/s)
<h3>Problem Solving</h3>
We know that :
- h = height or any other displacement at vertical line = 19.6 m
- g = acceleration of the gravity = 9.8 m/s²
- v = velocity = 343 m/s
What was asked :
= ... s
Step by step :
- Find the time when the object falls freely until it hits the water. Save value as





- Find the time when the sound propagate through air. Save value as




- Find the total time




<h3>Conclusion</h3>
So, the time needed before you hear the splash is approximately 2.06 s.