a 2700-ohm reisstor in an electric circuit draws a current of 2.4 milliamperes. the total charge that passes through the reisito
1 answer:
You might be interested in
Answer:
A. The work done during the process is W = 0
B. The value of heat transfer during the process Q = 442.83
Explanation:
Given Data
Initial pressure = 100 k pa
Initial temperature = 25 degree Celsius = 298 Kelvin
Final pressure = 300 k pa
Vessel is rigid so change in volume of the gas is zero. so that initial volume is equal to final volume.
⇒ =
------------- (1)
Since volume of the gas is constant so pressure of the gas is directly proportional to the temperature of the gas.
⇒ P ∝ T
⇒ =
⇒ Put all the values in the above formula we get the final temperature
⇒ =
× 298
⇒ = 894 Kelvin
(A). Work done during the process is given by W = P × ()
From equation (1), =
so work done W = P × 0 = 0
⇒ W = 0
Therefore the work done during the process is zero.
Heat transfer during the process is given by the formula Q = m (
-
)
Where m = mass of the gas = 1 kg
= specific heat at constant volume of nitrogen = 0.743
Thus the heat transfer Q = 1 × 0.743 × ( 894- 298 )
⇒ Q = 442.83
Therefore the value of heat transfer during the process Q = 442.83
Answer:
Magnitude the net torque about its axis of rotation is 2.41 Nm
Solution:
As per the question:
The radius of the wrapped rope around the drum, r = 1.33 m
Force applied to the right side of the drum, F = 4.35 N
The radius of the rope wrapped around the core, r' = 0.51 m
Force on the cylinder in the downward direction, F' = 6.62 N
Now, the magnitude of the net torque is given by:
where
= Torque due to Force, F
= Torque due to Force, F'
Now,
The net torque comes out to be negative, this shows that rotation of cylinder is in the clockwise direction from its stationary position.
Now, the magnitude of the net torque: