Answer:
the difference in pressure between the inside and outside of the droplets is 538 Pa
Explanation:
given data
temperature = 68 °F
average diameter = 200 µm
to find out
what is the difference in pressure between the inside and outside of the droplets
solution
we know here surface tension of carbon tetra chloride at 68 °F is get from table 1.6 physical properties of liquid that is
σ = 2.69 × 
N/m
so average radius = 
= 100 µm = 100 ×
m
now here we know relation between pressure difference and surface tension
so we can derive difference pressure as
2π×σ×r = Δp×π×r² .....................1
here r is radius and Δp pressure difference and σ surface tension
Δp = 
put here value
Δp = 
Δp = 538
so the difference in pressure between the inside and outside of the droplets is 538 Pa
Answer:
Upper bounds 22.07 GPa
Lower bounds 17.59 GPa
Explanation:
Calculation to estimate the upper and lower bounds of the modulus of this composite.
First step is to calculate the maximum modulus for the combined material using this formula
Modulus of Elasticity for mixture
E= EcuVcu+EwVw
Let pug in the formula
E =( 110 x 0.40)+ (407 x 0.60)
E=44+244.2 GPa
E=288.2GPa
Second step is to calculate the combined specific gravity using this formula
p= pcuVcu+pwTw
Let plug in the formula
p = (19.3 x 0.40) + (8.9 x 0.60)
p=7.72+5.34
p=13.06
Now let calculate the UPPER BOUNDS and the LOWER BOUNDS of the Specific stiffness
UPPER BOUNDS
Using this formula
Upper bounds=E/p
Let plug in the formula
Upper bounds=288.2/13.06
Upper bounds=22.07 GPa
LOWER BOUNDS
Using this formula
Lower bounds=EcuVcu/pcu+EwVw/pw
Let plug in the formula
Lower bounds =( 110 x 0.40)/8.9+ (407 x 0.60)/19.3
Lower bounds=(44/8.9)+(244.2/19.3)
Lower bounds=4.94+12.65
Lower bounds=17.59 GPa
Therefore the Estimated upper and lower bounds of the modulus of this composite will be:
Upper bounds 22.07 GPa
Lower bounds 17.59 GPa
Answer:
There are 6 types of pressure control valves and their function is to regulate the pressure below a threshold level within safe limits and to maintain and control pressure of a particular circuit.
Explanation:
The six type of Pressure valve with their functions are given below:
a. Unloading Valve:
These type of pressure valve are used to pour fluid into the container at very low or no pressure.
b. Safety valve:
These are used when the pressure within the vessel is in excess as inside temperature is near about preset [point point then these valves are open to release the extra pressure and are closed once normal conditions are regained.
c. Pressure Reducing Valve:
These are basically used for the control of the pressure in downstream not exceeding the design limits.
d. Pressure Relief Valves:
These are basically used to limit and regulate the pressure of any system.
e. Counter Balance Valve:
These are used to develop pressure in the reverse direction at the actuator's return line in order to keep the load under control.
f. Sequence Valve:
These are used to maintain sequence or order in the operations of two parts or branches.
Answer:
Detailed solution is given in the attached diagram
Answer:
A. A clay ball with a slice cut out, showing the layers of the earth
Explanation:
