Answer:
The source and destination IP addresses are 10.0.1.19 and 10.0.1.25
Explanation:
NAT or network address translation is a network protocol is used by private networks to access the internet by assigning or mapping a public IP address to the private addresses.
The host with IP address 10.0.1.19 searches for the actual destination IP address 128.119.160.183 in its private network and when it does not find it, it sends the packet to the default gateway IP address 10.0.1.25, which is where the private IP address is NATted and sent to the destination.
Answer:
876100
019343
Explanation:
10s complement of a decimal number is obtained by the following process:
- Obtain 9s complement ( Subtract each digit by 9)
- Add 1 to the result
1) 123900
9s complement => (9-1)(9-2)(9-3)(9-9)(9-0)(9-0)
= 876099
Adding 1 , 10s complement of 123900 = 876100
2) 980657
9s complement = (9-9)(9-8)(9-0)(9-6)(9-5)(9-7)
= 019342
Adding 1 , 10s complement of 980657 = 019343
The BIOS feature that enables a hard drive to read or write several sectors at a time is called IDE block mode
Explanation:
IDE block mode setting speeds up IDE drivers when enabled by allowing multiple sectors to read or write operations. This BIOS feature rushes up hard disk drive passage by transferring many divisions of data per interrupt rather than using the normal single-sector transfer mode.
This mode of transfer is known as block transfers. When block transfers are enabled, depends on the IDE controller, nearly 64 KB of data can be transferred per interrupt.
Answer:i would love to help but are there any answer choices?
Explanation: please provide answer choices for an accurate answer