Answer:
See attachment for complete answer.
Explanation:
Given that:Suppose that all the dislocations in 2000 mm3 of crystal were somehow removed and linked end to end. Given 1 m =0.0006214 mile, how far (in miles) would this chain extend for dislocation densities of
(a) 103 mm-2 (undeformed metal)
(b) 1010 mm-2 (cold-worked metal)
See attchment for completed solvings
Answer:
1. The correct answer is B. Ideations Sketch
2. The correct answer is A. How a product actually works
Explanation:
1. The correct answer is B. Ideations Sketch
Due to the fact that in the process sketch the idea is to show all the steps that need to be followed to achieve or construct the final product, in the persuasive sketch it is intended to know about the possible influence over the audience and make them want the design notion, in the explanatory sketch what is wanted is to communicate about the structure, function and form in a clear way focusing on how it would be possible to use the product or idea design; and finally in the ideations sketch is used to propose solutions to any concer, in this way the concept is to create a prototype of what the final product would be.
2. The correct answer is A. How a product actually works
Because the word function comes from the latin function which means “to perform”. This lead us to define function as the capacity to perform an activity that a product or idea has or what it can do for a consumer or customer.
Answer:
Using Hilbert Transformation, we can transmit two independent base-band information signals by using SSB on a common-carrier frequency.
Explanation:
- In SSB modulators, we pre-process a real signal by Hilbert Transform filter to form another real signal
- The signal has the same spectral amplitude but has 90° phase shift at each frequency relative to its input signal.
- The ordered pair gets almost all of its negative components cancelled
- thus, with the use of Hilbert Transformation, we can transmit two independent base-band information signals by using SSB on a common carrier frequency.
Answer: hydraulic retention time,τ=28.67 hours
Explanation:
The hydraulic retention time τ (tau), is given as The volume of the settling tank(V) divided by the influent flowrate(Q)
τ =V/Q
But Volume is not known and is given as
Volume = surface area x depth of the tank
= 8000 ft² X 12 ft
= 96,000 ft³
Also, the influent flow rate is in mgd ( million gallons per day), we change it to ft³/sec so as to be in same unit with the volume in ft³
1 million gallons/day = 1.5472286365101 cubic feet/second
0.6mgd = 1.5472286365101 cubic feet/second x 0.6
=0.93cubic feet/second
τ =V/Q
96,000 ft³/0.93 ft³/sec
τ=103,225.8 secs
changing to hours
103,225.8 /3600 =28.67 hours
The hydraulic retention time =28.67 hours
Answer:
C. Up and left
Explanation:
The negative x-axis is on the left side of a graph.
If you turn 20° clockwise, then it would still be in the second quadrant pointing up a little bit.
Just loook at the picture i linked below