Answer:
subnet mask
Explanation:
A subnetwork or subnet mask is a logical subdivision of an IP network.
To find out your subnet mask, the simlest way around it is to is to run a simple command line in windows.
Simply press the Windows key and “R” at the same time to open the command prompt and type “cmd” followed by “enter.” This will allow you to see your subnet mask.
In IPv4, the subnet mask 255.255. 255.0 is 32 bits and consists of four 8-bit octets. The address: 10.10. 10.0 subnet mask 255.255.255.0 this simply indicated that the subnet mask consists of a range of IP addresses from 10.10.10.0 - 10.10.10.255.
Subnet masks (IPv4) are often involved in identifying the range of IP addresses that make up a subnet, it can also be described as a group of IP addresses on the same network.
Either options C or D
You can change the chart type of the whole chart or for single data series in most 2-D charts to give the chart a different look. In 3D or bubble charts, you can only change the chart type of the whole chart. By following the steps in the answers above, you will be in a position to select available chart type like column chart or line chart.
