The complex, highly technical formula for capacitors is
<em>Q = C V</em>
Charge = (capacitance) (voltage)
Charge = (3 F) (24 V)
<em>Charge = 72 Coulombs</em>
The positive plate of the capacitor is missing 72 coulombs worth of electrons. They were sucked into positive terminal of the battery stack.
The negative plate of the capacitor has 72 coulombs worth of extra electrons. They came from the negative terminal of the battery stack.
You should be aware that this is a humongous amount of charge ! An average <u><em>lightning bolt</em></u>, where electrons flow between a cloud and the ground for a short time, is estimated to transfer around <u><em>15 coulombs</em></u> of charge !
The scenario in the question involves a "supercapacitor". 3 F is is no ordinary component ... One distributor I checked lists one of these that's able to stand 24 volts on it, but that product costs $35 apiece, you have to order at least 100 of them at a time, and they take 2 weeks to get.
Also, IF you can charge this animal to 24 volts, it will hold 864J of energy. You'd probably have a hard time accomplishing this task with a bag of leftover AA batteries.
Answer:
Given force=10lb
L1=4in converting to feet
But 0.08333ft= 1 inch
Then 4 inch is 0.3332
6inch is 0.49998
But hookes law states
F=Kx where F is force,K is the force constant ,X
K=F/X=10/0.3333=30N/m
Integrating this
Integral of 30x with limit 0.333 to 0.5
F=30x^2/2=15x^2substing the limit
F=(15(0.5^2-0.33^2)=2.08ft-lb
Explanation:
You need to observe the car at two different times.
-- The first time:
You write down the car's speed, and the direction it's pointing.
-- The second time:
You write down the car's speed and the direction it's pointing, again.
You take the data back to your lab to analyze it.
-- You compare the first and second speed. If they're different,
then the car had acceleration during the time between the two
observations.
-- You compare the first and second direction. If those are different,
even if the speeds are the same, then the car had acceleration during
the time between the two observations.
(Remember, "acceleration" doesn't mean "speeding up".
It means any change in speed or direction of motion.)
Answer:
area is 2d volume is 3d
Explanation:
Area refers to the size of two-dimensional surface. Volume refers to the size of a three-dimensional space.
1.7 Btu
1 watt = 3.41214 Btu/h
1watt * 1h = 3.41214 Btu/h * h
1 = 3.41214 Btu/ (watt*h)/
0.5 watt * h = 0.5 watt*h * 3.41214 Btu/(watt*h) = 1.706 Btu
