All categories

3 years ago

What is angle of p hirojection

1 answer:

3 0

The angle at which an observer draw an object to convert it from 3D to 2D plane such as real object image to a plane paper is known as angle of projection. There are two angle of projection used in drawing: 1st angle of projection(first quadrant of coordinate plane)

You might be interested in

An induced-draft cooling tower cools 90,000 gallons per minute of water from 84 to 68oF. Air at 14.61 psia, 70oF dry bulb and 60

belka [17]

Answer:

a. V = 109.64 × 10⁵ ft/min

b. Mw = 654519.54 kg/hr

Explanation:

Given Parameters

mass flow rate of water, Mw = 90000g/min = 6607.33 kg/s

inlet temperature of water, T1 = 84 F = 28.89 C

outlet temperature of water, T2 = 68 F = 20 C

specific heat capacity of water, c = 4.18kJ/kgK

rate of heat remover from water, Qw is given by

Qw = 6607.33[28.89 - 20] * 4.18

Qw = 245529.545kw

For air, inlet condition

DBT = 70 F hi = 43.43 kJ/kg

WBT = 60 F wi = 0.00874 kJ/kg

u1 = 0.8445 m/kg

oulet condition,

DBT = 70 F RH = 100.1

h1 = 83.504kJ/kg

Wo = 0.222kJ/kg

check the attached file for complete solution

3 0

3 years ago

An unknown immiscible liquid seeps into the bottom of an open oil tank. Some measurements indicate that the depth of the unknown

barxatty [35]

Answer:

The specific weight of unknown liquid is found to be 15 KN/m³

Explanation:

The total pressure in tank is measured to be 65 KPa in the tank. But, the total pressure will be equal to the sum of pressures due to both oil and unknown liquid.

Total Pressure = Pressure of oil + Pressure of unknown liquid

65 KPa = (Specific Weight of oil)(depth of oil) + (Specific Weight of unknown liquid)(depth of unknown liquid)

65 KN/m² = (8.5 KN/m³)(5 m) + (Specific Weight of Unknown Liquid)(1.5 m)

(Specific Weight of Unknown Liquid)(1.5 m) = 65 KN/m² - 42.5 KN/m²

(Specific Weight of Unknown Liquid) = (22.5 KN/m²)/1.5 m

<u>Specific Weight of Unknown Liquid = 15 KN/m³</u>

4 0

3 years ago

Water is flowing at a rate of 0.15 ft3/s in a 6 inch diameter pipe. The water then goes through a sudden contraction to a 2 inch

Georgia [21]

Answer:

Head loss=0.00366 ft

Explanation:

Given :Water flow rate Q=0.15 $\frac{ft^{3}}{sec}$

$D_{1}$ = 6 inch=0.5 ft

$D_{2}$ =2 inch=0.1667 ft

As we know that Q=AV

$A_{1}\times V_{1}=A_{2}\times V_{2}$

So $V_{2}=\frac{Q}{A_2}$

$V_{2}=\dfrac{.015}{\frac{3.14}{4}\times 0.1667^{2}}$

$V_{2$ =0.687 ft/sec

We know that Head loss due to sudden contraction

$h_{l}=K\frac{V_{2}^2}{2g}$

If nothing is given then take K=0.5

So head loss $h_{l}=(0.5)\frac{{0.687}^2}{2\times 32.18}$

=0.00366 ft

So head loss=0.00366 ft

4 0

3 years ago

A converging nozzle has an exit area of 0.001 m2. Air enters the nozzle with negligible velocity at a pressure of 1 MPa and a te

Artyom0805 [142]

Explanation:

a converging nozzle has an exit area of 0.001 m2. Air enters the nozzle with negligible velocity at a pressure of 1 MPa and a temperature of 360 K. For isentropic flow of an ideal gas with k = 1.4 and the gas constant R = Ru/MW = 287 J/kg-K, determine the mass flow rate in kg/s and the exit Mach number for back pressures

100% (3 ratings)

A_2 = 0.001 m^2 P_1 = 1 MPa, T_1 = 360 k P_2 = 500 kpa p^gamma - 1/gamma proportional T (1000/500)^1.4 - 1/1.4 = (360/T_2) 2^4/14 = 360/T_2 T_2

3 0

3 years ago

Please help i give brainliest

Mazyrski [523]

Answer:

A mock-up

Explanation:

It is made of cheap and easy to access parts.

5 0

3 years ago

What is angle of p hirojection​

What is angle of p hirojection