Consider sending a stream of packets from Host A to Host B using Ipsec. Typically, a new SA will be established for each packet sent in the stream. True or False? Tweet Answer FALSE. REASON: Ipsec SA is first connect with Host A and Host B. So, all packets in the stream use the new SA.
Yeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeesss i have
Answer:
It is a half-duplex serial transmission mode, and this can be provided through the RS-485 two wired electrical interface. And this can be connected to the ethernet if required, connect to the LAN, and finally transmitting the video footage to all the screens. And the two reasons are:
1. Noiseless
2. Allows around 32 receivers.
Explanation:
Please check the answer.
Answer:
final thoughts
Explanation:
it is generally what we should do so that people can know what your opinion on it at the end
Use the following rules:
- The sum of currents that enter and exit a node (junction) is always zero. So if you have 3 wires that connect, through one flows 2A, the other 3A, then the third must deliver 5A (taking the direction into account!)
- The sum of voltages across different components should always add up. So if you have a battery of 10V with two unknown resistors, and over one of the resistors is 4V, you know the other one has the remaining 6V.
- With resistors, V=I*R must hold.
With these basic rules you should get a long way!
