Ask question

Ask question

All categories

3 years ago

8

Make list of possible projects you would like consider doing in the place you live and could be a simple paint job or a bookcase

or piece of furniture
plz help

1 answer:

iren2701 [21]3 years ago

4 0

Answer:

Make a model of an highway to study the physics and how the road and velocity of a car.

You might be interested in

How does a motion sensor work?

Ahat [919]

Answer:

A motion sensor uses one or multiple technologies to detect movement in an area. When a sensor detects motion, it sends a signal to your security systems control panel, which connects to your monitoring panel system. This alerts you and the monitoring center to a potential threat in your home.

Hope It Helps You................

3 0

3 years ago

An engineer is going to redesign an ejection seat for an airplane. The seat was designed for pilots weighing between 130 lb and

k0ka [10]

Answer:

A.) 0.3088

B.) 0.0017

C.) part A

Explanation:

A.)

$z1=$ $\frac{\left(150-137\right)}{27.7}$ $=0.4693$

$z2=\frac{\left(201-137\right)}{27.7}=2.3105$

$P(0.4693$

B.)

$z1=\frac{150-137}{27.7/ \sqrt{39}} =2.9309\\z2=\frac{201-137}{27.7/ \sqrt{39}}=14.4289$

$\\P(2.9309$

C.) Since the seat performance for an individual pilot is more important than 39 different pilots.

3 0

4 years ago

Read 2 more answers

Electric current originates from which part of an atom? *

yanalaym [24]

Answer: Electric current originates from positively charged protons negatively charged electrons of an atom.

Explanation:

The movement of ions (positive or negative) from one point to another is called electric current.

An atom has three sub-atomic particles. These are protons, neutrons and electrons.

Protons are positively charged, neutrons have no charge and electrons are negatively charged. Protons and neutrons reside inside the nucleus of an atom whereas electrons revolve around the nucleus.

So, protons and electrons are responsible for originating electric current form an atom as these are the charged particles.

Thus, we can conclude that electric current originates from positively charged protons negatively charged electrons of an atom.

3 0

3 years ago

Steam at a pressure of 100 bar and temperature of 600 °C enters an adiabatic nozzle with a velocity of 35 m/s. It leaves the noz

butalik [34]

Answer:

Exit velocity $V_2=1472.2$ m/s.

Explanation:

Given:

At inlet:

$P_1=100 bar,T_=600°C,V_1=35m/s$

Properties of steam at 100 bar and 600°C

$h_1=3624.7\frac{KJ}{Kg}$

At exit:Lets take exit velocity $V_2$

We know that if we know only one property inside the dome then we will find the other property by using steam property table.

Given that dryness or quality of steam at the exit of nozzle is 0.85 and pressure P=80 bar.So from steam table we can find the other properties.

Properties of saturated steam at 80 bar

$h_f= 1316.61\frac{KJ}{Kg} ,h_g= 2757.8\frac{KJ}{Kg}$

So the enthalpy of steam at the exit of turbine

$h_2=h_f+x(h_g-h_f)\frac{KJ}{Kg}$

$h_2=1316.61+0.85(2757.8-1316.61)\frac{KJ}{Kg}$

$h_2=2541.62\frac{KJ}{Kg}$

Now from first law for open system

$h_1+\dfrac{V_1^2}{2}+Q=h_2+\dfrac{V_2^2}{2}+w$

In the case of adiabatic nozzle Q=0,W=0

$3624.7+\dfrac{35^2}{2000}+0=2541.62+\dfrac{(V_2)^2}{2000}+0$

$V_2=1472.2$ m/s

So Exit velocity $V_2=1472.2$ m/s.

4 0

4 years ago

A smooth concrete pipe (1.5-ft diameter) carries water from a reservoir to an industrial treatment plant 1 mile away and dischar

Kamila [148]

ANSWER:

Q = 0.17ft3/s

EXPLANATION: since the water runs downhill on a 1:100 slope, that means the flow is laminar.

Using poiseuille equation:

Q = (π × D^4 × ∆P) ÷ (128 × U × ∆X)

Q is the volume flow rate.

π is pie constant value at 3.142

D is the diameter of the pipe

∆P is the pressure drop

U is the viscosity

∆X is the length of the pipe or distance of flow.

Form the question, we are to determine U then Find Q

Therefore;

D = 1.5ft

∆P = 1pa since the minor losses are negligible.

∆X = 1mile = 5280ft.

STEP1: FIND U

Viscosity is a function of the temperature of the liquid. An increase in temperature increases the viscosity of the liquid.

We know that at room temperature, which is 25°C the viscosity of water is 8.9×10^-4pa.s . We can find the viscosity of water at 4°C by cross multiplying.

Therefore;

25°C = 8.9×10^-4pa.s

4°C = U

Cross multiply

U25°C = 4°C × 8.9×10^-4pa.s

U25°C = 0.00356°C.pa.s

Therefore;

U = 0.00356°C.pa.s ÷ 25°C

U = 1.424×10^-4pa.s

Therefore at 4°C the viscosity of water in the pipe is 1.424×10^-4pa.s

STEP2: FIND Q

Imputing the values into poiseuille equation above.

Q = (3.142 × (1.5ft)^4 × 1pa) ÷ (128 × 1.424×10^-4pa.s × 5280ft)

Q = 15.906375pa.ft4 ÷ 96.239616pa.s.ft

Therefore;

Q = 0.16547887ft3/s

Approximately;

Q = 0.17ft3/s

6 0

3 years ago