Answer:
I this a working or u just wanna text?
Answer:
the maximum length of specimen before deformation is found to be 235.6 mm
Explanation:
First, we need to find the stress on the cylinder.
Stress = σ = P/A
where,
P = Load = 2000 N
A = Cross-sectional area = πd²/4 = π(0.0037 m)²/4
A = 1.0752 x 10^-5 m²
σ = 2000 N/1.0752 x 10^-5 m²
σ = 186 MPa
Now, we find the strain (∈):
Elastic Modulus = Stress / Strain
E = σ / ∈
∈ = σ / E
∈ = 186 x 10^6 Pa/107 x 10^9 Pa
∈ = 1.74 x 10^-3 mm/mm
Now, we find the original length.
∈ = Elongation/Original Length
Original Length = Elongation/∈
Original Length = 0.41 mm/1.74 x 10^-3
<u>Original Length = 235.6 mm</u>
Keep outlets out of reach from Tub, ground fault circuit interrupter (GFCI) receptacles must be used
Answer:
For continuity of fluid in 1-d, A1*V1=A2*V2
Thus V2= A1*V1/A2
Explanation:
Detailed solution is in image attached
Answer:
1st part: Section W18X76 is adequate
2nd part: Section W21X62 is adequate
Explanation:
See the attached file for the calculation