Answer:
C. (2×43) - (2×p)
Step-by-step explanation:
The question is 2(43-p)
Which means 2 is multiplying the bracket.
So the answer to the question is 2×43 - 2×p
Which will give us 86 - 2p
So you then solve all the possible answers to see if it the same answer as the one we got
Answer:
I will assume that the end of the top section if it were cut at 0 degrees would be cut at right angles to the length of the section.
Joining a top section with a 37 degree end angle to a side piece with a 50 degree end angle will result in the length of the side piece being at an angle of
37 + 50 = 87 degrees to each other.
The same will be true for the other side.
If the sides were parallel, then going up one side, across the top and then down the other side will result in a change of direction of 180 degrees. However, in this frame the direction turns 87 degrees at the first top corner and another 87 degrees at the second top corner. This is a total of
87 + 87 = 174 degrees instead of 180 degrees.
The two sides diverge at an angle of
180 - 174 = 6 degrees from each other as they extend downwards from the top of the frame
Step-by-step explanation:
Answer:
36.2
Step-by-step explanation:
Assuming that the dotted line is a perpendicular bisector, we can say that it splits the side that is 30 units long into 2 sets of 15 units. Then, we can use the pythaogrean theorem to solve (Leg A is 33 and Leg B: 15). a^2+b^2=c^2
33^2+15^2=c^2
1089+225=c^2
1314=c^2
Square root of 1314 = square root of c^2
36.2 aapproximately c
Answer:
Number of terms: n=6
Step-by-step explanation:
We are given:
a₁ = 0.75
r = 4
Sₙ = 1023.75
We need to find number of terms i.e n
The formula used will be:
Putting values and fining n
We know that 
Using Exponent rule: 
So, Number of terms: n=6
Answer:
I just looked it up and that is correct!
