Answer: C) Both Techs A and B
Explanation:
Technician A and Technician B are both very right. Using a spray bottle and water, the ignition wire test can be carried out using any of the methods described above. Or, by using a grounded test lead that is connected to a multimeter, you can also conduct the test for faulty ignition wires.
Answer:
B. It can add to an engineer’s credentials and qualifications.
Explanation:
Answer:
a
Explanation:
that is what energy efficiency is
Answer:
1. Mechanically actuated
2. Electrically actuated
3.Pneumatically actuated
Explanation:
The general method of actuation of brakes are as follows:
1. Mechanically actuated
In this method linkages or livers are used to produce the action of brakes.In this mechanical component is used to apply the brakes. Band brakes,shoe brakes etc are the example of mechanical breaks.
2. Electrically actuated
In this method magnetic coil is used to and this magnetic coil produce magnetic field due to this magnetic filed brakes apply.
3.Pneumatically actuated
In this method compressed air is supply from high pressure vessel and this pressurized air apply the break.
Answer:
a) see attachment
b) A= m0m1+ m1m2+ m0m2
see attachment for K-map
c) see attachment
Explanation:
a) see attachment for truth table
b) see attachment for k-map
A= m0m1+ m1m2+ m0m2
c) see attachment for gate level circuit