It is called a ‘Waste Stream’
This should be right! Hope this helps, have a great day!
Answer:
Larger
Explanation:
When a vehicle is accelerated, the weight of the vehicle and the driver is transferred to the front of the rear of the car.
This transferred weight is nothing but the additional weight that presses the car's suspension in the downward direction thereby affecting tire contact patch in the rear due to which the rear tires loses adhesion.
Answer:
Plain Bearings and Rolling Element Bearings -
Explanation:
two different type of bearing are:
1) Plain Bearings - Plain bearings are the easiest form of bearings and consist of only the layer of the bearings without rolling components.
2)Rolling Element Bearings - Rolling element bearings use balls or rollers between two rings – allowing movement with little rotating and sliding friction. These type of bearings include bearings for balls and rollers.
The radius of the specimen is 60 mm
<u>Explanation:</u>
Given-
Length, L = 60 mm
Elongated length, l = 10.8 mm
Load, F = 50,000 N
radius, r = ?
We are supposed to calculate the radius of a cylindrical brass specimen in order to produce an elongation of 10.8 mm when a load of 50,000 N is applied. It is necessary to compute the strain corresponding to this
elongation using Equation:
ε = Δl / l₀
ε = 10.8 / 60
ε = 0.18
We know,
σ = F / A
Where A = πr²
According to the stress-strain curve of brass alloy,
σ = 440 MPa
Thus,
Therefore, the radius of the specimen is 60 mm