Think about it. 65 mph means you go 65 miles in one hour, so in 2 hours you go 65×2 miles, in 3 hours you go 65×3 miles, and in 3.5 hours you go 65 × 3.5 miles.
Hope this helped
Cross section<span> is a cut at an angle perpendicular to its axis so its interior </span>structure can be viewed<span>.
</span>A structural section describes a house's foundation assembly. This structural section refers to the section of the assembly that is horizontal and it shows the basic shell of the house.
The answer to tgis is going to be B .i think
Answer:
#
P(R I Q) = P(RnQ) / P(Q) = 0.1 Therefore P(RnQ) = 0.1 X 0.35 = 0.035 (The intersection in the centre of a Venn Diagram)
P(RnQ') = 0.15 In a Venn Diagram this is R but excluding the centre intersection with Q. Therefore P(R) = P(RnQ') + P(RnQ) = 0.15 + 0.035 = 0.185
P(RUQ) = 0.15 + 0.035 + 0.315 = 0.5 so 0.5 must be outside the Venn Diagram circles.
Explanation:
hope this helps
Answer:
If the question is (2/3x) = -10,
x = -(1/15) = - 0.06667
The check is presented under the explanation below
If the correct question is (2/3)x = -10,
x = -15
The check is presented under the explanation below
Explanation:
If the question is rightly written as it is in the attached document,
(2/3x) = -10
We can cross multiply and obtain
2 = -10 × 3x
-30x = 2
x = -(2/30) = -(1/15) = - 0.06667
To check
(2/3x) = -10,
(2 ÷ 3x) = -10
2 ÷ 3(-1/15) = 2 ÷ (-1/5) = 2 ÷ (-0.2) = -10 (Correct!)
If the correct question is
(2/3)x = -10
Divide both sides by (2/3)
x = -10 ÷ (2/3)
x = -10 × (3/2)
x = -15
To check
(2/3)x = -10
If x = -15
(2/3) × (-15) = -10 (Correct!)
Hope this Helps!!!
