Answer:
True Position using features of size (MMC/LMC)
Explanation:
True Position using features of size (MMC/LMC)
However, with true position you can make the tolerance referenced to several datum's as opposed to just one with axis perpendicularity. When you callout true position using datums on the face, and sides of the part – perpendicularity is controlled as well.
Surface: Perpendicularity is measured using a height gauge, similar to flatness, however, the gauge (or part) is locked to a 90° datum to measure how perpendicular the surface is. The entire surface has to be measured if it is a flat feature.
If the tolerance is preceded by a diameter symbol (⌀), the tolerance is a diameter or cylindrical shaped zone, as in the position of a hole. If there is no symbol preceding the tolerance, the default tolerance zone shape is parallel planes or a total wide zone, as in the position of a slot or profile of a surface.
Answer:
I = 5.0 A V=0
Explanation:
Assuming that the ammeter is an ideal one (which means that the internal resistance is negligible compared with other resistors in the circuit), as the voltage through the capacitor can't change instantaneously, just after the switch is closed, will behave like a short, so applying Ohm's law, the current in the circuit will be as follows:
As the voltage in the capacitor, can't change instantaneously, assuming an ideal voltmeter (infinite resistance) , the lecture on the voltmeter across the capacitor will be just 0.
As time goes by, the voltage measured will follow the following equation:
We see that when t=0, V=0.
The General Data Protection Regulation (GDPR) is the European regulation on the protection of natural persons in regard to the processing of their personal data and the free circulation of these data. It is a regulation at the level of the European Union, so that any company in the union, or those companies that have businesses in the European Union, that handle personal information of any kind, must comply with it. In the Terms of service, a company has a clear statement about what data they share; So that company does not need to take more measures because they will be fully compatible with GDPR.
Therefore the correct option is TRUE.
Answer:
4. A series of steps engineers use to solve problems.
Explanation:
The process of engineering design is a sequence of procedures that engineers pursue to arrive at a solution to a specific problem. Most times the solution includes creating a product such as a computer code, which fulfills certain conditions or performs a function. If the project in-hand includes designing, constructing, and testing it, then engineers probably adopt the design process. Steps of the process include defining the problem, doing background research, specifying requirements, brainstorming solutions, etc.