Answer:
The viscosities of the oils are 0.967 Pa.s and 1.933 Pa.s
Explanation:
Assuming the two oils are Newtonian fluids.
From Newton's law of viscosity for Newtonian fluids, we know that the shear stress is proportional to the velocity gradient with the viscosity serving as the constant of proportionality.
τ = μ (∂v/∂y)
There are oils above and below the plate, so we can write this expression for the both cases.
τ₁ = μ₁ (∂v/∂y)
τ₂ = μ₂ (∂v/∂y)
dv = 0.3 m/s
dy = (0.06/2) = 0.03 m (the plate is centered in a gap of width 0.06 m)
τ₁ = μ₁ (0.3/0.03) = 10μ₁
τ₂ = μ₂ (0.3/0.03) = 10μ₂
But the shear stress on the plate is given as 29 N per square meter.
τ = 29 N/m²
But this stress is a sum of stress due to both shear stress above and below the plate
τ = τ₁ + τ₂ = 10μ₁ + 10μ₂ = 29
But it is also given that one viscosity is twice the other
μ₁ = 2μ₂
10μ₁ + 10μ₂ = 29
10(2μ₂) + 10μ₂ = 29
30μ₂ = 29
μ₂ = (29/30) = 0.967 Pa.s
μ₁ = 2μ₂ = 2 × 0.967 = 1.933 Pa.s
Hope this Helps!!!
The answer is increases because when something like that decreases it’s always decreasing that probly makes no sense Imao but it’s increases
Answer:
the are useful because they transmit a rotary motion they are used in shafts like the driveshaft in a car
Explanation:
Answer:
see explaination
Explanation:
Balanced equation or stoichiometry equation means in a product after reaction there is no unburned carbon compound left or we can say the oxygen is sufficient to combine with all the carbon and hydrogen moleculs to form Carbon-dioxide and water respectively.
The dew point temperature of balanced equation will be 100°c because water vapour bis present in it and it will condense at 100°c at 1 bar pressure while the other products need much lower temperatures to liquify.
See attachment.
Answer:
Explanation:
Pie charts generally should have no more than eight segments.
