Complete Question:
A machinist turns the power on to a grinding wheel, which is at rest at time t = 0.00 s. The wheel accelerates uniformly for 10 s and reaches the operating angular velocity of 25 rad/s. The wheel is run at that angular velocity for 37 s and then power is shut off. The wheel decelerates uniformly at 1.5 rads/s2 until the wheel stops. In this situation, the time interval of angular deceleration (slowing down) is closest to
Answer:
t= 16.7 sec.
Explanation:
As we are told that the wheel is accelerating uniformly, we can apply the definition of angular acceleration to its value:
γ = (ωf -ω₀) / t
If the wheel was at rest at t-= 0.00 s, the angular acceleration is given by the following equation:
γ = ωf / t = 25 rad/sec / 10 sec = 2.5 rad/sec².
When the power is shut off, as the deceleration is uniform, we can apply the same equation as above, with ωf = 0, and ω₀ = 25 rad/sec, and γ = -1.5 rad/sec, as follows:
γ= (ωf-ω₀) /Δt⇒Δt = (0-25 rad/sec) / (-1.5 rad/sec²) = 16.7 sec
Answer:
P = 3000 Pa
Explanation:
Weight of Dorji, W = F = mg = 1500 N
The total surface area of soles of his feet is 0.5 m²
We need to find the pressure exerted by his body on the ground. The pressure is equal to the force acting per unit area. So,
So, the pressure exerted by his body on the ground is 3000 Pa.
Usually, you have to take two years of physical sciences with lab. It doesn't have to be physics, it can be chemistry or biology.
Answer:
It involves all three methods as the handle of the pot is conducting heat via touching the pan which gets it's heat from the burner that is radiating heat to the entire pan through waves of heat from the burner. There is then convection as the heat is being transferred as the liquids temperature changes.
This should be good if I remember it correctly which I hope so much I do.
