Answer:
a. The very first liquid process, when heated from 1250 degree Celsius, is expected to form at the temperature by which the vertical line crosses the phase boundary (a -(a + L)) which is about <em>1310 degree Celsius. </em>
b. The structure of that first liquid is identified by the intersection with ((a+ L)-L) phase boundary; <em>47wt %of Ni</em> is of a tie line formed across the (a+ L) phase area <em>at 1310 degrees.</em>
c. To find the alloy's full melting, it is determined that the intersection of the same vertical line at 60 wt percent Ni with (a -(a+L)) phase boundary is around <em>1350 degrees.</em>
c. The structure of the last remaining solid before full melting correlates to the intersection with the phase boundary (a -(a + L), of the tie line built at 1350 degrees across the (a + L) phase area, <em>being 72wt % of Ni.</em>
The LCA process is a systematic, phased approach and consists of four components: goal definition and scoping, inventory analysis, impact assessment, and interpretation. The standards are provided by the International Organisation for Standardisation (ISO) in ISO 14040 and 14044, and describe the four main phases of an LCA: Goal and scope definition. Inventory analysis. Impact assessment.
Hope this is helpful
Answer:
Obviously you shouldn't rely just on the meter for your safety. You'd disconnect wall fuses or kill main switches before you start, using the meter just gives you some extra protection: with the meter you might notice for example that you've disconnected the wrong fuse and the unit is still live.
Explanation:
Hope it helps! :)
Answer:
Modern and smart materials for making the products are improved by developing new materials and find new uses for the existing. As, modern industrialization society is increased demand and quality of the product.
Two modern's materials are:
Carbon Fiber: As, carbon fiber is a strong material and it is light in weight. Designers used it because it is five times strong as steel and two times as stiff. Carbon fiber is basically made out of very thin strands of carbon.
Fiber Optics: It is a new technology as, it is used as transparent solid to transmitted light signals.
Answer:
<em>The direction of ball will be Number 4 (as can be seen in attached picture) ---- the path of ball will be making some angle when it leaves the tube. </em>
Explanation:
The question is incomplete. So the picture, which is missing in question, is attached for your review.
As it can be seen in the picture, the ball coming out of the tube will have two components of velocity. One is along the length of tube (because ball is moving in that direction and is coming out from the hole), other is velocity component will be perpendicular to the tube (because the ball is made to move in that direction as the tube is rolling on the surface).
<em>So, taking the resultant of two vectors of velocity, the resultant direction of ball will be Number 4 (as can be seen in attached picture) ---- the path of ball will be making some angle when it leaves the tube. </em>