Answer:answer is part a 100 x
Explanation:
We know that a prefix of Mega(M) is used for a quantity of
numbers thus 100 MW = 100 x
Answer:
a) a1 : This is the incident voltage at port 1
b) b1 : This is the deflected voltage at port 1 ;
b1 =
c) S11 ; This is the input port voltage reflection coefficient when the input voltage is at port 1
S11 =
d) S12 : this is the gross voltage gain
S12 =
e) S21 : This is the forward voltage gain
S21 =
f) S22 : output port voltage reflection coefficient
S22 =
Explanation:
a) a1 : This is the incident voltage at port 1
b) b1 : This is the deflected voltage at port 1 ;
b1 =
c) S11 ; This is the input port voltage reflection coefficient when the input voltage is at port 1
S11 =
d) S12 : this is the gross voltage gain
S12 =
e) S21 : This is the forward voltage gain
S21 =
f) S22 : output port voltage reflection coefficient
S22 =
Answer: Nuclear Waste
Explanation: Nuclear energy makes radioactive waste. This radioactive waste is very deadly to all life forms.
Hope this helps!
Answer:
Torque at input shaft will be 176.8695 N-m
Explanation:
We have given input power
Angular speed = 2300 rpm
For converting rpm to rad/sec we have multiply with
So
We have to find torque
We know that power is given by , here is torque and is angular speed
So
So torque at input shaft will be 176.8695 N-m
Answer:
origin
Explanation:
The point of intersection of axis is called origin.
In 2D origin is the intersection point of x-axis and y-axis if we go right to the origin then it is positive x axis, if we go left side of origin then it is negative x- axis
Similarly when we go above the origin then it positive y axis , and if we go bellow the origin then it is negative x axis
In 3D origin is the intersection of x-axis, y-axis and z-axis
NOTE- For defining i take here x axis as horizontal axis and y-axis as vertical axis